Session D: Novel Processing
Date: 　 Thursday, September 25, 2003
Time: 　 13:30 p.m. - 16:45 p.m.
Venue: Kurashiki City Art Museum 3F Hall
　 　 　 　 Session Chair (D1-6):  M.Miyayama, IIS,Univ. of Tokyo, Japan
13:30 - 14:00 D-1 Development of New Materials by Mechanical Alloying  (Invited)
Jose M.Torralba* , Joao B.Fogagnolo** and Elisa M.Ruiz-Navas*
　 　 　 　 *Materials Science and Engineering Department,University CarlosⅢof Madrid,28911,Leganes,Spain
**Materials Engineering Department,Universidade Federal de Sao Carlos,Brazil
14:00 - 14:15 D-2 Cation Distribution and Magnetic Properties of Ni-Ferrite Produced by High Energy Milling
M.E.Rabanal, A.Varez , B.Levenfeld and J.M.Torralba
　 　 　 　 Dept.of Materials Science, Universidad Carlos Ⅲde Madrid,Avda de la Universidad n゜30,E-28911 Leganes(Spain);(eugenia@ing.uc3m.es)
14:15 - 14:30 D-3 Diffusion Bonding Assisted by Centrifugal Pressure
Y.Kinemuchi , K.Watari and S.Uchimura*
　 　 　 　 Advanced Industrial Science and Technology, Japan, *Shinto-V Cerax, Japan
14:30 - 14:45 D-4 Formation Process of Interfacial Phases at SiC/Cu Joint Friction-Bonded with Ti Intermediate Layer
Akio Nishimoto*, Masaaki Ando**, Makoto Takahashi***, Masatoshi Aritoshi****, Katsuya Akamatsu* and Kenji Ikeuchi***
　 　 　 　 * Department of Materials Science and Engineering, Kansai University, Japan
** Akita National College of Technology, *** Joining and Welding Research Institute, Osaka University, Japan
**** Hyogo Prefectural Institute of Industrial Research, Japan
14:45 - 15:00 D-5 Review of Aerosol Deposition Method and it's Appplication to MEMS
– Novel ceramics coating with collision of fine powder at room temperature –  (Invited)
Jun AKEDO
　 　 　 　 National Institute of Advanced Industrial Science and Technology
305-8564, 1-2-1 Namiki, Tsukuba, Ibaraki, Japan
15:00 - 15:15 D-6 High Electrical Greakdown Properties of Al2O3 Thin Layer Formed by Aerosol Deposition Method
Maxim Lebedev and Jun Akedo
　 　 　 　 National Institute of Advanced Industrial Science and Technology, Japan
　 　 　 　 Session Chair (D7-11): O.Milosevic, Institute of Technical Sciences of SASA, Serbia & Montenegro 
15:15 - 15:30 D-7 Morphology and Performance of Ni-YSZ Cermet Anode Fabricated from NiO-YSZ Composite Particles by MCB Technique for Solid Oxide Fuel Cell
Takehisa FUKUI *, Kenji MURATA *, Hiroya Abe **, Makio NAITO ** and Kiyoshi NOGI **
　 　 　 　 * Hosokawa Powder Technology Research Institute, Hirakata, Osaka 573-1132, Japan
** Joining and Welding Research Institute, Osaka University, Ibaraki, Osaka 567-0047, Japan
15:30 - 15:45 D-8 Construction of a 50-Watt Electric Generator Fuel Cell Using Ethanol
P. Aungkavattana*, S. Charojrochkul*, S. Assabumrungrat, S. Srichai,
J. Charoensuk, W. Khan-ngern, H. Mahaudom*, A. Kittiwanichawat*,
W. Wattana*, P. Khamphakdi, N. Nakayothin and M. Henson 
　 　 　 　 *National Metal and Materials Technology Center, 114 Thailand Science Park, Paholyothin Road, Pathumthani 12120, Thailand
15:45 - 16:00 D-9 Fabrication of High Performance La(Sr)Ga(Mg)O3-x Electrolyte Film by Electrophoretic Deposition for Low Temperature Operation solid Oxide Fuel Cell
Motohide MATSUDA*, Osamu OHARA*, Kenji MURATA**, Satoshi OHARA***, Takehisa FUKUI** and Michihiro MIYAKE*
　 　 　 　 * Department of Environmental Chemistry and Materials, Faculty of Environmental Science and Technology, Okayama University, Okayama 700-8530, Japan
** Hosokawa Powder Technology Research Institute, Hirakata, Osaka 573-1132, Japan
*** Japan Fine Ceramic Center, Research and Development Laboratory, Atsuta-ku, Nagoya 456-8587, Japan
16:00 - 16:15 D-10 Single-Chamber Solid Oxide Fuel Cells for Low Temperature Operation
Masaru Miyayama, Keisuke Nagasaka, Atsushi Akiyama and Yuji Noguchi
　 　 　 　 IIS,Univ. of Tokyo, Japan
16:15 - 16:45 D-11 Nanostructured Mg Alloys for Mobile Hydrogen Storage  (Invited)
V. Skripnyuk, E. Rabkin, R. Lapovok*, and Y. Estrin**
　 　 　 　 Department of Materials Engineering, TECHNION-Israel Institute of Technology, 32000 Haifa, Israel;
*School of Physics and Materials Engineering, Monash University, Clayton VIC 3800, Australia;
**Institut für Werkstoffkunde und Werkstofftechnik, TU Clausthal, Agricolastr. 6, D-38678 Clausthal-Zellerfeld, Germany