ICCCI2003 Poster Session

ICCCI2003 Poster Session
Date:	Thursday, September 25, 2003
Time:	17:00 - 18:30 p.m.
Venue:	Hotel Nikko Kurashiki 1F Lobby

Session A:	Nanoparticle Design and Suspension Controll
	PA-1	Preparaton of Nano-sized Single-component and Composite Particles by a New Gas Phase Reaction Method with Rapid Cooling Masayoshi KAWAHARA, Takehisa FUKUI, Toyokazu YOKOYAMA, Kazuki SUHARA* and Kiyoshi Nogi ** * Hosokawa Powder Technology Research Institute, Japan ** JWRI, Osaka Univ., Japan
	PA-2	A Study on the Phase Transition Characteristics of TiO2 Nano-Powders from Aquoeous TiOCl2 Solutions Adding with Various Additives Y.I.Cho, D.S.Hwang, S. C. Jung, S.J.Kim, M.Naito*, K.Uematsu and K.Nogi* Korea Photonics Technology Institute, Korea Sejong University, Department of Nano Science and Technology, Korea Sunchon National University, Department of Environmental Engineering, Korea JWRI, Osaka Univ., Japan **Nagaoka University of Technology, Dept. of Chemistry, Japan
	PA-3	Nano-Particle Dispersion in Silica Slurry Observed by In Situ Solidification Technique Chica Takai, Masayoshi Fujii and Minoru Takahashi Nagoya Institute of Technology,Japan
	PA-4	Effect of Slurry Preparing Conditions on the Strenghth of Alumina Ceramics Makoto Furukawa, Tadashi Hotta, Kenji Okamoto, Hiroya Abe* and Makio Naito*** * Japan Fine Ceramics Center, Japan Nippon Denko Ltd., Japan* JWRI, Osaka Univ., Japan
Session B:	High Temperature Interface
	PB-1	Growth Kinetics of Interface Reaction Layers during Diffusion Bonding of SiC Ceramic to TiAl Alloy H. J. Liu ,, H. Fujii , K. Nogi * * National Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001, P.R.China ** Joining and Welding Research Institute, Osaka University, Osaka 567-0047, Japan
	PB-2	Tensile Properties of Friction Stir Welded Thin Sheet of 1050-H24 Aluminum Alloy H. J. Liu ,, H. Fujii , K. Nogi * * Joining and Welding Research Institute, Osaka University, Osaka 567-0047, Japan ** National Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001, P.R.China
	PB-3	Surface Tension of 304 Stainless Steels under Plasma Conditions Hidetoshi Fujii,Teruhiko Misono,Taihei Matsumoto and Kiyoshi Nogi Joining and Welding Research Institute , Osaka University, Japan
	PB-4	Effects of Various Welding Parameters on Convection in Moltenpool Hidetoshi Fujii, Yasuyuki Morikawa, Masayoshi Kamai and Kiyoshi Nogi Joining and Welding Researcher Institute, Osaka University, Japan
Session C:	Particulate Materials
	PC-1	Assessment of Effective Desorption Amounts of Adsorbents for Adsorptive Desiccant Cooling System Yoshikazu Tashiro, Masahiro Kubo, and Yoshimasa Katsumi Takeshi Meguro, Katsutoshi Komeya, and Junichi Tatami* Matsushita Ecology Systems Co., Ltd.: 4017, Aza-Shimonakata, Takakicho, Kasugaishi,Aichi, 486-8522 Japan. *Yokohama National University:79-5 Tokiwadai Hodogaya-ku, Yokohama 240-8501 Japan.
Session D:	Novel Processing
	PD-1	Formation of MgB2 Superconducting Phase from Mg and B Composite Particle Hiroya ABE,* Makio NAITO,* Kiyoshi NOGI,* Akira KONDO, Takehisa FUKUI, Satoshi OHARA*, Motohide MATSUDA and Michihiro MIYAKE** * Joining and Welding Research Institute, Osaka University, Osaka 573-1132, Japan Hosokawa Powder Technology Research Institute, Hirakata, Osaka 573-1132, Japan * Japan Fine Ceramic Center, Research and Development Laboratory, Atsuta-ku, Nagoya 456-8587, Japan **** Department of Environmental Chemistry and Materials, Faculty of Environmental Science and Technology, Okayama University, Okayama 700-8530, Japan
Session E:	Microstructure
	PE-1	Fabrication of Grain Refined 7475Al Alloy Foils Utilizing RF Magnetron Sputtering T.Shibayanagi, M,Maeda,D.Watanabe,Y.Takayamaand M.Naka JWRI,Osaka University, Japan Graduate Student of Osaka Univ., Japan **Dept. of Mechanical Engineering, Utsunomiya Univ., Japan
	PE-2	Comparative Thermodynamic Study of Ga-Bi System Dragana Živković, Dragan Manasijević , Živan Živković* and Olivera Milošević** University of Belgrade, Technical Faculty, VJ 12, 19210 Bor *Institute of Technical Sciences SASA, Knez Mihajlova 35/IV, 11000 Belgrade, Serbia and Montenegro
	PE-3	Interfacial Microstructure of SiC/Cu Joint Bonded by Pulsed Electric-Current Sintering Akio Nishimoto and Katsuya Akamatsu Department of Materials Science and Engineering, Kansai Univ., Japan
	PE-4	Control of Microstructure for Improving Superplasticity in Ceramics Tohru SUZUKI, Koji Morita, Yoshio SAKKA and Keijiro Hiraga Materials Engineering Laboratory,National Instiute for Material Science, Japan
	PE-5	CaZrO3 and MnCO3 Influence on BaTiO3 Ceramics Properties V.Mitic, I.Mitrovic, V.Paunovica, L.Mancic** Faculty of Electronic Engineering, University of Nis, Serbia-Montenegro; *ITS SASA,Belgrade,Serbia-Montenegro
	PE-6	On the Bonding and Debonding Processes Aspects at Bi-Dissimilar Materials Interface on the View of the Directional Fracture Approach Nobuo NISHIMURA, Chairman and Professor of Civil Eng. Dept, Osaka Univ., Japan Refat El-Sheikhy, Housing & Building Research Center, Giza, Egypt, Visiting Researcher, Civil Eng. Dept, Osaka Univ., Japan
	PE-7	Microstructure Development in Nb2O5 Doped BaTiO3 Ceramics V.Mitic, V.Paunovic, O.Milosevic*. Faculty of Electronic Engineering, University of Nis, Serbia-Montenegro **ITS SASA, Belgrade, Serbia-M
Session F:	Hot Gas Cleaning
	PF-1	Characterization and Control of Ash Adhesion Behavior at High Temperature conditions Hidehiro Kamiya, Takashi Aozasa, Naoki Yamaguchi, Mayumi Tsukada Hiromitsu Matsuda* and Hisao Makino* Graduate School of Bio-Applications and Systems Engineering, BASE, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184-8588 Japan * Central Research Institute of Electric Power Industry, CRIEPI, Yokosuka, Kanagawa, 240-0196 Japan
	PF-2	Development of Regenerable Desulfurization Sorbent for Hot Coal Derived Gas Makoto Nunokawa, Makoto Kobayashi, Hiromi Shirai Central Research Institute of Electric Power Industry, Japan
	PF-3	Novel Temperature control Technique for a Medicinal Herb Dryer system Powered by a Photovoltaic Array Abd El-Shafy A. Nafeh, Hanaa M. Fargali, Faten H. Fahmy, and Mohamed A. Hassan* Electronics Research Institute, National Research Center Building, Cairo, Egypt *Faculty of Engineering, Cairo University, Giza, Egypt
Session G:	Interface Control
	PG-1	Phase Evolution in Ag:(Bi,Pb)2Sr2Ca2Cu3Ox Composite Powder L.Mancic, B.Marinkovic, P.Vulic, F.Rizzo, O.Milosevic* ITS SASA, Belgrade, Serbia-Montenegro; Pontifícia Universidade Católica do Rio de Janeiro,Brasil; **Faculty of Mining and Geology, Belgrade,Serbia-Montenegro
Session H:	Nanotechnology
	PH-1	Reduction of Thin Film Surface Roughness by Self-Assembling of Organic Molecules M.Itoh, K.Aota, R.Sugano and H.Takano Department of Chemical Engineering and Materials Science, Doshisha University, Kyo-Tanabe, Kyoto 610-0321, JAPAN
	PH-2	Microstructure and Anodic Properties of Ni-CGO Cermets Prepared by Spray Pyrolysis Eisaku Suda, Bernard Pacaud, Yvan Montardi, Mikio Itagaki, Satoshi Ohara* and Yasuo Takeda*** Anan Kasei Co., Ltd., Japan Rhodia Electronics and Catalysis, Japan Japan Fine Ceramics Center, Japan and **Mie University, Japan