・ Our research is introduced in the University Brocher (Page 8-9).Our laboratory has been selected as one of the top four laboratories. (If you cannot access, please let us know. We will post it.)
Dr Tomoaki MIYAZAWA and Prof. Hidetoshi FUJII has received STWJ (Science and Technology of Welding and Joining) Best Paper Award at the Institute of Materials and Minerals and Mining in England on 12th November.
"Development of High Strength Ir Based Alloy Tool for Friction Stir Welding"
Science and Technology of Welding and Joining, 17 (2012) 213-218.
→JSThome page
2013.12..3  Prof. Fujii gave a Keynote Lecutre on "Three- Dimesional Visualization of Metallic Flow to Understand Defect Formation Mechanisum during Friction Stir Welding: Steel and Aluminum" at THERMEC 2013 in USA.
2013.11..26  Prog.Kang and colleagues of Busan University in Korea visited our laboratory.
2013.11..12  Dr Tomoaki MIYAZAWA and Prof. Hidetoshi FUJII has received STWJ (Science and Technology of Welding and Joining) Best Paper Award at the Institute of Materials and Minerals and Mining in England on 12th November.
"Development of High Strength Ir Based Alloy Tool for Friction Stir Welding"
Science and Technology of Welding and Joining, 17 (2012) 213-218.
→JSThome page
2013.11..8   Mr Takuya IMAIZUMI received theBest Paper Awardat IJS-JW.
”Three Dimensional Visualization of Material Flow during Friction Stir Welding for Steel and Aluminum by Two Pairs of X-ray Transmission Systems" Congratulations!
2013.11.1   Prof. Abdel-Monem El-Batahgy of Egypt Central Research Institute for Metals has joined our laboratory through the JSPS program.
2013.10.12   Prof. Fujii gave a Keynote Lectureon ”Friction Stir Welding of Steels -Latest Welding Methods"at 5th International Conference on Welding Science and Engineering.
2013.10.9  Mr Michiharu MAKAMURA, Director of JST (Japan Science and Technology Agency) our laboratory to listen to our research activities.
2013.9.25  An article on the FSW is again listed in NIKKAN KOGYO news paper  
2013.9.18  An article on the FSW is again listed in NIKKAN KOGYO news paper  
2013.9.10 An article on the FSW is again listed in NIKKEI new paper.
2013.9.9-13   Miss Ohira made a presentation on ”Temperature Dependence of Surface Tension and Wetting Behavior in Sn-Ag/Single Crystal Al2O3 System" in EURO-MAT in Sevilla of Spain.
2013.8.29 The director and staffes of Federal University of Pernambuco in Brazil visited our laboratory. 
2013.8.27   Prof.Fujii met the University director Prof.Hirano to make some discussion.
2013.5.21   Prof Fujii gave a lecture on ”Friction Stir Welding of High Temperature Materials and Visualization of Flow"at Shandong University in China.
2013.5.19   Prof. Fujii gave a Keynote Lectureon "Enhancement of Joint Properties by Friction Stir Powder Processing (FSPP)" at the annual meeting of the Institute of Japan Light Metals.
2013.5.1  Prof.Hangai visited our laboratory from Gumma University to perform a collaboration work. He will stay here till 2nd May. 
2013.5.1  Mr Zhe Lei has joined our laboratory.
2013.4.26  A welcome party was held at Umeda. Mr Yuta Sato, Mr Hideyuki Kasai, Mr Kai Kawasumi as new master course students, Mr Masaru Sakamura, Mr Sungook Yoon, Mr Takuya Miura as new PhD course students, Mr Yuuma Sasakura as a new undergraduate student are very welcome. 
2013.4.23  Prof.Hatanaka visited our laboratory from Naruto University of Education to perform a collaboration work. He will stay here till 24th. 
 2013.4.22  A paper review meeting was started. 
2013.4.17-19  We made ten presentations at the spring annual meeting of theJapan Welding Society. 
2013.4.12  An article on the FSW is again listed in NIKKAN KOGYO news paper .  
2013.4.4  Mr Yuta Sato and Mr Hideyuki Kasai has jointed as new members. 
2013.4.2  The entrance celemony of Osaka Universityr was held. 
2013.3.27-29  We made five presentations at the spring annual meeting of theJapan Institute of Metals.  
2013.3.25 The graduation celemony of Osaka Universityr was held. Many congratulations forDr Koichi Imagawa, Mr Kenta Kitamura, Mr Yusuke Nishida, Mr Takuya Miura, Mr Masashi Watanabe and Kai Kawasumi.  
2013.3.22  The farewell party was held. Congratulations forDr Koichi Imagawa, Mr Kenta Kitamura, Mr Yusuke Nishida, Mr Takuya Miura, Mr Masashi Watanabe and Kai Kawasumi. 
2013.3.22  The best poster award was given to Mr Hiroki Hashikura from Osaka University G-COE program.
2013.3.18  Prof.Miyano visited our laboratory from Akita University to perform a collaboration work. 
2013.3.17  Mr Hashikura made a presentation at NIMS. "Evaluation of Thin Films for Cutting Tools by Cutting Force and Wettability" 
2013.3.14  Mr Sungook Yoon visited our laboratory from Korea. 
2013.3.5  The best presentation award was given to MrYusuke Kitamura from the Japan Welding Society. 
2013.3.4  Prof.Fujii made a Plenary Lecture at TMS. "THree Dimensional Visualization of Metallic Flow and Control of FSW Joint Properties Using New FSP Technique"
2013.3.1  Prof. Ueji has joined our laboratory as a Associate Professor. 
2013.2.28 Prof.Masaki visited our laboratory from Okinawa Junior College of Techinology to perform a collaboration work. 
2013.2.26  Prof.Fujii had an interview from Osaka University.
2013.2.19,20  Mr Kenta Kitamura and Yusuke Nishida made a presentation for the master course graduation examination. 
2013.2.18  Prof.Miyano visited our laboratory from Akita University to perform a collaboration work. He will stay here till 22nd February. 
2013.2.13  Mr Yuma Sasakura has joined our laboratory.  
2013.2.12  Prof.Masuda visited our laboratory from Waseda University to perform a collaboration work. He will stay here till 16th February.  
2013.2.7   Mr Koichi Imagawa made a presentation for the PhD degree. 
2013.2.7  Mr Masashi Watanabe and Mr Kai Kawasumi made a presentation for the graduation. 
2013.1.31  Mr Takuya Miura made a presentation for the master course graduation examination. 
2013.1.21  Dr Aonuma visited our laboratory from Tokyo Metropolitan Industrial Technology Research Institute to perform a collaboration work. He will stay here till 25th February.  
2013.1.12  A new year party was held. 
2013.1.4  A happy new year!
2012.12.28  The year end party was held at Umeda after the year-end cleaning. 
2012.12.25  Prof.Sato visited our laboratory from Osaka City University to perform a collaboration work. 
2012.12.20  Prof.Hatanaka visited our laboratory from Naruto University of Education to perform a collaboration work..  
2012.12.20  Prof.Hareyama visited our laboratory from Iwate University to perform a collaboration work. 
2012.12.19 Prof.Hangai visited our laboratory from Gumma University to perform a collaboration work. 
2012.12.17  Our previous member, Mr Ryo Nishimoto visited our laboratory  
 2012.12.15  Our previous member, Mr Yasuhiro Aoki visited our laboratory 
2012.12.14 Dr Tanigawa visited our laboratory from Japan Atomic Energy Agency to perform a collaboration work.  
2012.12.11  Mr Imagawa mada a presentation on "Development of Surface Hardening Technology of Cast Iron Using Friction Stir Processing and Investigation on Its Mechanism" for the Ph.D degree.  
2012.12.6  Prof. Yanagimoto of the University of Tokyo mada a Lecture.
2012.12.5 Mr Hashimoto made a presentation at the Japan Society of Mechanal Engineers.
2012.12.5  We hold a seminar at Tokyo. 
2012.12.4  Prof.Fujii made a presentation for an intermediate evaluation of a national project.  
2012.11.29  A paper "Understanding Defect Formation Mechanism during Friction Stir Welding by Three-dimensional Visualization of Material Flow” by Y.Morisada, T.Imaizumi and H.Fujii was selected as the Best Paper.
2012.11.29  Mr Yoon from Korea took the entrance examination for the PhD course.
 2012.11.28-30 We made two invited lectures and four oral presentations and one poster presentation at an internationa conference VISUAL-JW 2012. 
 2012.11.26 Prof.Fujii made a lecture at Industrial Technology Institute of Ibaraki Prefecture. 
2012.11.21  A laboratory research meeting was held. The students made a presentation of their own researches.  
2012.11.20  Prof.Hareyama visited our laboratory from Iwate University to perform a collaboration work.  
2012.11.15  Prof.Shinohara visited our laboratory from Brazil.
2012.11.14  We made two presentations at Smart Processing Society for Materials, Environment and Engergy.
2012.11.12  Prof.Miyano visited our laboratory from Akita University to perform a collaboration work. 
 2012.11.12 Prof.Sato visited our laboratory from Osaka City University to perform a collaboration work. 
2012.11.9 Several students from JICA visited our laboratory.
2012.11.5  Prof. Sun made an invoited lecture on”Friction Stir Welding of Bulk Metallic Glass with Metals" at the 3rd Int. Symp. on Advaned Materials Development and Intefrationf Novel Structured Metallic and Inorganic Materials.
2012.11.5 Prof.Hangai visited our laboratory from Gumma University to perform a collaboration work.  
2012.10.25  More than 100 students from Ikutokukan Junior High School visited our institute.    
2012.10.19  Prof. Fujii made a plenary lecture on " Friction Stir Welding of High Temperature Materials and Visualization of Flow" at the 2nd International Symposium on Friction Stir Welding in China, which was held in Beijing. 
2012.10.11 An article on the FSW is listed in Gas Review.  
2012.10.10  Mr Sakamura visited our laboratory from Hiroshima Prefectural Technology Research Institute to perform a collaboration work. 
2012.10.4 Dr Russel Steel and Mr Matsunaga of Mega Stir Co.Ltd visited our laboratory. 
2012.10.2  We hold a farewell party for Mr Shin. 
 2012.10.2 We had an interview from the Gas Review.  
2012.10.2 An article on the FSW is listed in NIKKEI news paper 
2012.10.1  Prof.Wu and his staff of Shanghai Jiao Tong University visited our laboratory.
2012.10.1  The lectures have started.
2012.9.28  An article on the FSW is listed in NIKKEI SANGYO news paper 
2012.9.26-28  13 papers were presented at the annal meeting of theJapan Welding Society in Nara.
2012.9.24-25 Prof.Hatanaka visited our laboratory from Naruto University of Education to perform a collaboration work.
2012.9.24  An article on the FSW is again listed in NIKKAN KOGYO news paper .  
2012.9.21  An article on the FSW is listed in NIKKAN KOGYO news paper . 
2012.9.21  Dr Graham Wylde from TWI, UK visited our laboratory 
2012.9.20  Prof.S.-P.Hnnula and his studens from Finland visited our laboratory. 
2012.9.18  Ms Ying Zou has joined our laboratory as a specially appointed researcher.
2012.9.17-19  7 papers were presented at the annal meeting of theJapan Insitute of Metals and Iron Steel Institute of Japan.
2012.9.11  Nikkei newspaper visit our laboratory for an interview. 
2012.9.11  Nikkan Kogyou newspaper visit our laboratory for an interview. 
2012.9.7-8  The laboratory members visited Tottori and Shimane Prefectures. 
2012.9.4  A meeting was held for a nationa project. 
2012.9.3  Dr Sechi visited our laboratory from Kagoshima Prefectural Institute of Industrial Technology to perform a collaboration work. 
2012.8.27-29  An entrance examination for the graduate school was held. 
2012.8.21-26  Prof.Fujii visited Sao Paulo University and Federal University of Rio de Janeiro in Brazil.
2012.8.11-19  Summer Holidays 
2012.8.10  The external evaluation members visited our laboratory to see the FSW and 3D visualization equipment. 
2012.8.9-10  A laboratory research meeting was held. The students made a presentation of their own researches. 
2012.8.7  Prof.Hatanaka visited our laboratory from Naruto University of Education to perform a collaboration work..
2012.8.3  Prof.Fujii made a lecture on Current Situation and Prospect on FSW at the Nagano Prefecture General Industrial Technology Center. 
2012.8.1  A meeting was held for a nationa project.  
2012.7.26  We made a demonstration of FSW for visitors.
2012.7.25  Mr Utsunomiya visited our laboratory from Kagawa University to perform a collaboration work. 
2012.7.20  About 10 students visited our institute to see our equipment. 
2012.7.19  The JWRI festival was held.Our lab. served YAKISOBA (Fried noodles). 
2012.7.18   All the members from Iwate University and Osaka Municipal Technical Research Institute had a meeting for the JST national project.
2012.7.17  2012.8.3 
2012.7.13  We won a baseball game against Nakatani Lab. for the YAKIN CUP 
2012.7.4  Mr Newishy has returned to Egypt. He stayed our laboratory for six months. 
2012.6.26  Prof.Fujii made a lecture on New World in FSW at the Nakanoshima Cener in Osaka. 
2012.6.25  A meeting was held for a nationa project. 
2012.6.22-23  A laboratory research meeting was held. 
2012.6.20  An article on Smart FSW of our laboratory is listed in KOTSU news paper
2012.6.14  A photo was taken of our laboratory members for the graduation albumn.
2012.6.13 Prof.Fujii was awarded with Mr Matsuoka, Ishikawa, Kawada and Masuda from Japan Welding Engineering Society.
2012.6.7  Prof.Hatanaka visited our laboratory from Naruto University of Education to perform a collaboration work.  
2012.6.6  We lost a baseball game against Yasuda Lab. for the YAKIN CUP  
2012.6.6  Prof.Nakai visited our laboratory from Tohoku University to perform a collaboration work 
2012.6.1   Dr Fukuzumi visited our laboratory from Osaka Municipal Technical Research Institute to perform a collaboration work 
2012.5.30  Mr Fuminori Inagaki (M2) was awarded from High Temperature Society. 
2012.5.28   A meeting was held for a nationa project. 
2012.5.22   Prof.Abel-Monem El-Batahgy visited our laboratory from Egypt.
2012.5.22  A welcome party was held for Ms Ishii. 
 2012.5.15-17 We made five presentations at 9th International Friction Stir Welding Symposium held at Huntsville in USA 
2012.5.8  Mr Kouki Tamashiro (M1) appeared a TV program call MEZAMASHI TV on the Fuji TV network. 
2012.5.2  Prof.Ueji visited our laboratory from Kagawa University to perform a collaboration work  
2012.5.1  A oriantation was held at our institute to welcome new students.
2012.4.30  A FSW demonstration was performed for visitors to the ICHO festival.
2012.4.23 A meeting was held for a nationa project.  
2012.4.20  Prof.Fujii made a lecture on Recent Trends in FSW at the Campus Innovation Cener in Tokyo. 
2012.4.19  Ms Hiroko Ishii has joined our laboratory. 
2012.4.18  A welcome party was held for Mr.Imaizumi, Mr.Tamashiro, Mr.Kawasumi and Mr.Watanabe.->Photo studio 
2012.4.11-14  Japan International Welding Show 2012 was held. Our laboratory was in charge of the JWRI display.
2012.4.13  Prof.Fujii made a lecture on Friction Stir Processing of thermal Sprayed WC layer at Osaka Academia in Osaka. 
2012.4.10-12  Our laboratory members (Mr Tamashiro, Mr Kitamura, Dr Morisada, Mr.Miura, Ms.Chen and Mr. Imagawa) made six presentations at the annual meeting of Japan Welding Society. 
2012.4.10  An article on the lecture and display by our laboratory at the Welidng Show is listed in NIKKAN KOGYO news paper . 
2012.4.5  Mr.Takuya Imaizumi, Mr.Kouki Tamashiro have joined our laboratory. 
2012.4.3  The entrace ceremony of Osaka University was held. Miss.Chika Ohira and Mr Shuo Wu have entered the master course and Mr Nan Xu and Mr Hiroki Hashikura have entered the PhD course. 
2012.3.28-30  Annual meetings of the Japan Institute of Metals and Insititute for Steel and Iron of Japan were held. in Yokohama. Four presentations related to our laboratory were made. (Mr Komine, Mr.Shimanaka, Mr Hashikura and Dr Nagaoka. 
2012.3.29   Prof. Sato visited our laboratory from Osaka City University to perform a collaboration work. 
2012.3.29  Prof. Ueji visited our laboratory from Kagawa University to perform a collaboration work. 
2012.3.28  Prof. Sugeta visited our laboratory from Hiroshima University to perform a collaboration work. 
2012.3.27  A meeting was held for a nationa project.
2012.3.26   Prof. Kwon of Ulsan Unversity, Korea and 7 other members visited our laboratory.  
2012.3.24  A farewel party was held to celebrate Mr.Fuminori Inagaki, Mr.Xukun Ni, Mr Ryo Nishimoto, Mr.Hiroki Hashikura, Ms Chika Ohira and Dr Saad Kohdir. Saad returned Egypt. 
2012.3.21  Prof. Masuda visited our laboratory from Waseda University to perform a collaboration work.  
2012.3.19  An article on the FSW of our laboratory at the Welidng Show is listed in NIKKAN KOGYO news paper .  
2012.3.19  Miss Chika Ohira was awaded a prize from the Japan Institute of Metals and Insititute for Steel and Iron of Japan. (Our laboratory members win the prize for the second consecutive year). Congratulations!.   
2012.3.19  Prof.Fujii made a presentation on "Mechanism of Excellent Wetting of Boron Nitride by Molten Aluminum", and Dr Sechi made a presentation on "Dynamic Wetting Behavior of Hexagonal Boron Nitride by Silver-Copper-Titanium Alloy Braze and Dissimilar Laser Brazing of Hexagonal Boron Nitride and Tungsten Carbide" at the 7th International Conference on High Temperature Capillarity which was held in Israel.
2012.3.12  Prof. Miyano visited our laboratory from Akita University to perform a collaboration work. 
2012.3.9  Our previous member, Mr Nobuyoshi Sogabe visited our laboratory 
2012.3.2  Miss Juan Chen was awaded a best poster prize of G-COE program. Congratulations!.  
2012.2.27  Prof. Nambu visited our laboratory from Tokyo University to perform a collaboration work. 
2012.2.24  A meeting was held for a nationa project. 
2012.2.22  A Mr Kenta Kitamura, Mr Yusuke Nishida and Mr Takuya Miura made presentation at the Department of Materials and Manufacturing Science.
2012.2.17 Mr.Xukun Ni, Mr Ryo Nishimoto, Mr.Hiroki Hashikuramade presentations for the final examination for the master course.
2012.2.16  Mr.Fuminori Inagaki made a presentation for the final examination for the master course. 
2012.2.16  Mr.Kawasumi and Mr.Watanabe have joined our laboratory. 
2012.2.15  Prof. Ueji visited our laboratory from Kagawa University to perform a collaboration work. 
2012.2.14 Dr Morisada was awaded a best paper prize of the G-COE program. Congratulations!.
2012.2.13  Our previous member, Mr Hideaki Kato visited our laboratory 
2012.2.11  Some members of a forum of Institute of Steel and Iron of Japan visited our laboratory  
2012.2.7  Prof.Fujii made the final presentation for a national project (surppoting industry). 
2012.2.4  Miss Ohira was awaded a best presentation prize of the graduation thesis.. Congratulations!. 
2012.2.3  Mr Tomoaki Miyazawa has passed the final examination for the PhD course. Congratulations!. 
2012.2.1 Mr.Hiroki Hashikura made a presentation for the final examination for the master course. 
2012.1.31 Dr. Ohishi visited our laboratory from Hiroshima Prefectural Technology Research Cenber to perform a collaboration work.  
2012.1.19-20  A laboratory research meeting was held.  
2012.1.20  Prof.Miyano visited our laboratory from Akita Univeristy to perform a collaboration work 
2012.1.19  Prof. Ueji visited our laboratory from Kagawa University to perform a collaboration work.  
2012.1.17  A welcome party was held to welcome Mr Mohamed Newishy from Egypt.
 2012.1.7  A new year party was held at Prof.Fujii's house. 
2012.1.7  Mr Mohamed Newishy has joined our laboratory from Egypt. 
2011.12.29  Our previous member, Mr Hiroyuki Fukuyama visited our laboratory  
2011.12.28   Prof. Ueji visited our laboratory from Kagawa University to perform a collaboration work. 
2011.12.27  The year end party was held at Umeda after the year-end cleaning.
2011.12.26  Prof. Takeuchi visited our laboratory from Osaka University to perform a collaboration work. 
2011.12.26  A meeting was held for a nationa project 
2011.12.19  Mr Tomoaki Miyazawa made a presentation on his phD thesis.  
2011.12.16  Prof. Fujii made a lecture on Mircostructure Control of Ti Alloy by FSW at a forum organized by the Japan Institute of Metals. 
2011.12.15  Mr Kitamura made a presentation on on Friction Stir Welding of Ti alloys at a forum organized by the Japan Institute of Metals.
2011.12.13 Prof. Ueda visited our laboratory from Kansai University to perform a collaboration work. 
2011.12.8  The Tokyo JWRI seminar, whcih was in charge of our laboratory, was held at Campus Innovation Center in Tokyo.
2011.11.28-30  We made three presentations at an International Symposium on Materials Science and Innovatio for Sustainable Society -- Eco-Materials and Eco-Innovation for Global Sustainability
Y.Morisada 「Three-dimensional Visualization of Material Flow in FSW by X-ray Radiography」
J.Chen 「Microstructure Evolution of Friction Stir Welded Fine-grained Non-combustive Mg Alloy」
K.Imagawa 「Partial Surface Hardening of Low Carbon Steel by Friction Stir Powder Processing」
 
2011.11.25   A meeting was held for a nationa project 
2011.11.22  We made a demonstration of FSW of steel. 
2011.11.21 We made five presentation at High Temperature Society. Hashikura, Nishida, Inagaki, Kitamura and Nishimoto 
2011.11.18  Prof. Tanigawa visited our laboratory from Japan Atomic Energy Agency to do a collaboration work.  
2011.11.17   Saad Khodir made a presentation on "Microstructure and Mechanical Properties of SK4 High Carbon Steel Weld Metals Produced by Friction Stir Welding" at the 1st Interquadrennial ICF Conference in Middle East and Africa. 
2011.11.14  Prof. Sato visited our laboratory from Osaka City University to do a collaboration work.  
2011.11.11  Prof.Fujii made a lecture on "Effects of Oxygen Content and Welding Conditions on the Penetration Depth in AA-Plasma Welding" in Kumamoto at a meeting organized by the Japan Welding Society. 
2011.11.07-9  We made six presentation at the annual meeting of Japan Institute of Metals. (OKINAWA) (Kitamura, Miura, NIshida, Hashikura, Nagaoka and Ohishi)
2011.11.02  We perticipated in the long distance relay (called EKIDEN) in the Suita Cup and were 23rd ranked. (Miura-Fujii-Ni-Xu-Ohira) 
2011.10.31 Prof.Fujii made a lecture on FSW at JST in Tokyo 
2011.10.29  Prof. Ueji visited our laboratory from Kagawa University to do a collaboration work.  
2011.10.27  A foreign student visited our laboratory through the JICA arrangement 
2011.10.27   We lost a volleyball game easily for the Suita Cup.  
2011.10.26   Prof.Fujii made a lecture on Fundamentals of FSW in Tokyo. 
2011.10.24   A meeting was held for a nationa project. 
2011.10.24 We had interviews from Osaka TV. Dr Morisada, Mr Miura and Mr Shen were boradcasted.
2011.10.22   Prof.Fujii made a lecture on Recent Trends of FSW of steel in Nagoya.
2011.10.21 A convivial party was held at the Department of Materials and Manufacturing Science. 
2011.10.19  A welcome party for Mrs Oda and Mr Xu was held in Umeda->Photo studio
2011.10.19  Dr Nagaoka visited our laboratory from Osaka Municipal Technical Research Institute to do a collaboration work. 
2011.10.18  A High Temerature Thermophysical Properties Forum was held. 
2011.10.17  We won a baseball game against Nakano laboratory for the Yakin Cup. We are 3rd ranked.
2011.10.15  Prof. Ueji visited our laboratory from Kagawa University to do a collaboration work. 
2011.10.14  We made a domonstration of FSW of steel. 
2011.10.06  Prof. Ueji visited our laboratory from Kagawa University to do a collaboration work. 
2011.10.05  We won a basketball game to be the best 32 teams for the Suita Cup. We will proceed the next game.
2011.09.30  Mr Nan XU has joined our to group as a research student from China 
2011.09.29 Foreign students visited our laboratory through the JICA arrangement
2011.09.29  We lost a baseball game 4-8 against Yamashita laboratory for the Yakin Cup. 
2011.09.29  A meeting was held for a nationa project. 
2011.09.22  Our previous member, Mr Koji Inada (2010.3), Sang Jing Hong(2011.3) and Mr Yukihide Yoshihara (2011.3) visited our laboratory.
2011.09.21  Prof. Nakai (Niinomi laboratory) visited our laboratory from Tohoku University to do a collaboration work. 
2011.09.21  A laboratory tour was canceled due to cancelation of the ISIJ annal meeting.
2011.09.19  Mrs. Oda has joined our laboratory as a secretary.
2011.09.16  Mr Kitamura and Mr Nishida has returned from a one-month short stay in USA.
2011.09.14  Prof. Hangai visited our laboratory from Gumma University to do a collaboration work. 
2011.09.12 Prof. Hareyama visited our laboratory from Iwate University to do a collaboration work. 
2011.09.08 Mr Fuminori Inagaki (Master course student) has received the Best Poster Award for young scientists from the Japan Welding Society. "Effect of Ultrasonic Wave on Weld Quality."  
2011.09.08  Seven papers were presented at the Japan Welding Society.
2011.09.07  Five papers were presented at the Japan Welding Society. 
2011.09.02 Mr Hashikura and Mr Wu have passed the entrace examinations. 
2011.09.01  We had an interview from NIKKEI newspaper.  
2011.08.31 Prof. Ueji visited our laboratory from Kagawa University to do a collaboration work. 
2011.08.26  A party was held to celebrate that Mr Hashikura and Mr Wu have passed the entrace examinations.
2011.08.26  A meeting was held for a nationa project. 
2011.08.23  Mr. Tamashiro from Okinawa National College of Technology visited our laboratory.  
2011.08.19 Prof. Takeuchi visited our laboratory from Osaka University to start a collaboration work. 
2011.8.12-
2011.8.16
 
Summer Holidays
2011.08 .11  All students made presentations on their own researches at a lab. meeting. 
2011.08 .01  Prof.Fujii has received the Osaka University Achievement Award. Congratulations!  
2011.08 .01  Fabrication of Fe-Based Metallic Glass Particle Reinforced Al-Based Composite Materials by Friction Stir Processing
Materials Transactions
Volume 52, Issue 8, 1 August 2011, Pages 1634-1640
Hidetoshi Fujii, Yufeng Sun, Koji Inada, Youngsu Ji, Yoshihiko Yokoyama, Hisamichi Kimura and Akihisa Inoue
  
2011.07.28 The JWRI festival was held in Arata Memorial Hall.Our lab. served YAKISOBA (Fried noodles).
2011.07.27  A meeting was held for a nationa project. 
2011.07.22 We made a demonstration of FSW for visitors. s 
2011.07.22  Prof. Ueji visited our laboratory from Kagawa University to do a collaboration work. 
2011.07.19 Miss Chika Ohira has passeed the entrance examination for the master course. Congratulations! 
2011.07.15  A kick-off meeting for the OXYTHERM project (Internationa Space Station) was held at Bonn, Germany.  
2011.07.11 We had an interview from the ISIJ.  
2011.07.06  Miss Chika Ohira made a presentation on the effect of oxygen partial pressure on surface tension of Sn-Ag alloys for the entrance examination for the master course. 
 2011.07.05 Prof. Ueji visited our laboratory from Kagawa University to do a collaboration work. 
2011.07 .01  We won a baseball game against Utsunomiya Lab. to be the best four labs. for the YAKIN CUP. 
2011.06 .29 Prof. Sato visited our laboratory from Osaka CityUniversity to start a collaboration work. 
2011.06 .27  A meeting was held for a nationa project  
2011.06 .24  All students made presentations on their own researches at a lab. meeting. A drinking party was held at night.
2011.06.17  We won a baseball game against Fujiwara Lab. for the YAKIN CUP. 
2011.06.15   A site-visit for a JST project was held.
2011.06.07  A photo of the laboratory members was taken for the albumn for the graduation.
2011.05.31  A drinking party was held at night. 
2011.05.30  Mr Yukihide Yoshihara (Master course student) has received the Best Paper Award for young scientists from the High Tempreture Society. "Effect of Interfacial Reactions on Wetting of BN by Molten Al." 
2011.05.30  Mr Hong Sang Jing (Master course student) has received the Best Paper Award for young scientists from the High Tempreture Society. "Effect of Welding Conditions on Microstructure of Friction Stir Welded Joints."
2011.05.30  Dr Yoshiaki Morisada has received the Research Promotion Award from the Powder Metallurgy Society. "Study on Diamond Dispersed Hard Alloy Manufactured Using Power Metallurgy without Ultra High Pressure.
2011.05.30  Prof.Fujii has received the Best Review Paper Award from the High Tempreture Society. "FSW and FSP of Ferrous Alloys" 
2011.05.26  Interface microstructure evolution of dissimilar friction stir butt welded F82H steel and SUS304
Materials Science and Engineering: A
Volume 528, Issue 18, 15 July 2011, Pages 5812-5821
Young Dong Chung, Hidetoshi Fujii, Yufeng Sun and Hiroyasu Tanigawa
 
2011.05.25  A laser cladding machine has been installed.
2011.05.24  A meeting was held for a nationa project  
2011.05.23  Dr Tanigawa visited our laboratory from the Japan Atomic Energy Agency to do a collaboration work. 
2011.05.20  A preliminary entrance exaination was held for the master course.
2011.05.19  A FSW demonstration was made for visitors.  
2011.05.13 Prof. Kanda visited our laboratory from Fukui Institute of Technology to do a collaboration work 
2011.05.11  Prof. Ueji visited our laboratory from Kagawa University to do a collaboration work.
2011.05.07  The effect of SiC particles on the microstructure and mechanical properties of friction stir welded pure copper joints
Materials Science and Engineering: A
Volume 528, Issues 16-17, 25 June 2011, Pages 5470-5475
Y.F. Sun and H. Fujii
 
2011.05.06 A new secretary Mrs Isuzu Stewart has joined our laboratory..
2011.04.30  Ms Sumikura left our lab. Thank you for one year!  
2011.04.26 Prof.Li of Xian Jiaotong University visited our lab.  
2011.04.25  A meeting was held for a nationa project 
2011.04.20-22 An annal meeting of Japan Welding Society was held in Tokyo. We made six presentations.
2011.04.20  Mr Tomoaki MIYAZAWA won the BEST PAPER AWARD for the young scientists of Japan Welding Society. "Develpment of Ir Based Tool for Frction Stir Weldng of High Temperature Materials"
2011.04.20  An article on Friction Welding of Ti allloys of our laboratory is listed in NIKKAN KOGYO news paper .
2011.04.18  A party was held to welcome Prof.Morisada, Mr Kitamura, Mr Imagawa and Mr Miura." ->Photo studio 
2011.04.14 Prof. Fujii made a presentation on "Establishment of Macro-Heterogeneous Structure Manufacturing Technology Using In-Process Microstructure Control by Friction Stir Processing"
2011.04.08   Prof. Nambu visited our laboratory from Tokyo University to do a collaboration work. 
2011.04.05  Mr Nishida and Mr Miura have joined our group as master course students. 
2011.04.01   Dr Morisada has joined our group as an Assistant Professor. 
2011.03.31   An ultrasonic TIG welder has been installed.
2011.03.25  Mr Chung has received the PhD degree, Mr Hong and Mr Yoshihara have received the MSc Degree. ->Photo studio
2011.03.24  A farewell part was held to celebrate the graduation of Mr Chung, Mr Hong and Mr Yoshihara. ->Photo studio
2011.03.20  Mr Imagawa and Miss Chen made presentations at a G-COE program meeting.
2011.03.19 Mr Chung won the best research award at G-COE program. Congratulations!
2011.03.18 Prof. Fujii made an invited lecture on "Trends on Friction Stir Weldiing and Application"at Toyama Industrial Technology Center.  
2011.03.10  Prof. Fujii made an invited lecture on "Friction Stir Weldiing Non-weldable Materials"at the six university project meeting in Tokyo. 
2011.03.02 Prof. Fujii made an invited lecture on "Friction Stir Powder Processing (FSPP) in Al/Cu and Fe/C systems"at the TMS annual meeting. 
2011.02.28  Dr Morisada made an invited lecture on "Fabrication of Nanostructured Tool Steel Layer by Combination of Laser Cladding and Friction Stir Processing" at the TMS annual meeting.
2011.02.23  Mr Inagaki, Mr Xu, Mr Nishimoto and Mr Hashikura made a presentation for the half-way meting.
2011.02.21   A meeting was held for a nationa project.
2011.02.18  Mr. Y.Mori has joined to our laboratory.
2011.02.16   Mr.SangJin Hong and Mr.Yukihide Yoshihara made presentations for their graduation. Congratulations!
2011.02.13    Mr Miyazawa has got married.
 2011.02.10   A welcome party was held for Ms.Ohira. ->Photo studio
2011.02.10  Mr.SangJin Hong and Mr.Yukihide Yoshihara submitted their Masters' theses. 
2011.02.05  Mr.Kenta Kitamura and Mr.Ryosuke Nishida made presentations for their graduation. Congratulations!
2011.02.04   Ms. C.Ohira has joined to our laboratory.
2011.02.03  Prof.Fujii made a presentation on Surface Hardening of Cast Iron Using High Speed Rotation Tool at Osaka International Convention Hall.
2011.02.01   Students finished eating all cups of instant noodles given by a previous member, Mr Katoh.
2011.01.31   Mr.Kenta Kitamura and Mr.Ryosuke Nishida submitted their graduation theses.
2011.01.26   Microstructure and mechanical properties of friction stir welded pure Mo joints
2011.01.24    A meeting was held for a nationa project.
2011.01.17  Prof.Miyano from Akita University and Prof.Hareyama from Iwate University visited our laboratory to do collaboration works.
2011.01.08   A new year party was held. Past members also attened it. ->Photo studio
 2011.01.05  Our previous post-doc, Prof. Shanping Lu has been promoted to full Professor at the Institute of Metal Research, Chinese Academy of Sciences since October, 2010. Congratulations!
 2010.12.29-2011.1.3   Winter holidays
2010.12.24   A meeting was held for a nationa project
2010.12.22  We made a year end cleaning and a year end party of our laboratory. ->Photo studio
2010.12.16   A year end party of JWRI was held at Hankyu Hotel.
2010.12.15   Prof.Fujii mada a lecture on "Recent Advances and Collaborations with Industry in Friction Stir Welding at Osaka University" at the Kansai District Meeting in Amagasaki.
2010.12.15  Mr Chung mada a presentation on "Friction Stir Welding of Steel Which Is Not Easily Welded" for the Ph.D degree. 
2010.12.13   Prof.Fujii mada a lecture on "Fundamentals of FSW" at the OWO.
 2010.12.9   A seminar organized by JWRI was held in Tokyo.
 2010.12.1  Prof.Ueji visited our laboratory from Kagawa University to do a collaboration work.
2010.12.07   Mechanical properties of friction stir butt welds of high nitrogen-containing austenitic stainless steel  
Materials Science and Engineering: A, Volume 528, Issue 6, 15 March 2011, Pages 2917-2921
Yasuyuki Miyano, Hidetoshi Fujii, Yufeng Sun, Yasuyuki Katada, Shuji Kuroda, Osamu Kamiya
2010.11.26   Prof.Kanda visited our laboratory from Fukui Institute of Technology to do a collaboration work.
2010.11.25   A meeting was held for a nationa project.
2010.11.24   All students made presentations on their own researches at a lab. meeting.
 2010.11.16  Prof.Fujii mada a lecture on "Friction Stir Welding of Steels" at the JWS Chugoku Branch.
2010.11.11   We had many visitors from an international conference called Visual-JW.
 2010.11.8   We cleaned the tennis court in JWRI.
 2010.11.6  Fabrication of nanostructured tool steel layer by combination of laser cladding and friction stir processing  
Surface and Coatings Technology, Volume 205, Issue 11, 25 February 2011, Pages 3397-3403
Yoshiaki Morisada, Hidetoshi Fujii, Tadashi Mizuno, Genryu Abe, Toru Nagaoka, Masao Fukusumi
2010.11.2   Today was the last day for Mr Mostafa Mousavizade who is going back to Iran. ->Photo studio
 2010.11.1 23th: Science Direct Top 25 Hottest Articles: Materials Science and Engineering A; July-September 2010
Investigation of the welding parameter dependent microstructure and mechanical properties of friction stir welded pure copper
  
Materials Science and Engineering: A, Volume 527, Issue 26, 15 October 2010, Pages 6879-6886
Y.F. Sun, H. Fujii
2010.10.29  We had a party for the Materials Science Course.
2010.10.25   An article on Friction Welding of our laboratory is listed in NIKKAN KOGYO news paper .
 2010.10.25    Prof.Miyano, Akita University, visited our laboratory to do a collaboration work.
2010.10.22   Prof.Fujii made a lecture on "Friction Stir Welding of a Carbon Steel" at Shanghai Jiao Tong University in China.
2010.10.15  We had a farewell party for Mr Mostafa Mousavizade who is going back to Iran and a welcom party for MrJin Ming Shen.->Photo studio
2010.10.11  Developement of friction stir welding of high strength steel sheet  
Science and Technology of Welding and Joining, Volume 16, Issue 2, 1 February 2011,
181-187
M.Matsushita, Y.KItani, R.Ikeda, M.Ono, H.Fujii and Y.D.Chung
2010.10.10   We visited Awaji Island as a group tour.->Photo studio
2010.10.08   Prof.Kanda visited our laboratory to do a collaboration work.
 2010.10.07  Prof.Fujii made a lecture on "FSW and FSP of Steel at a symposium organized by Japan Welding Soceity.
2010.10.02   A presentation has been made on our study by Ms Kawauchi at Japan Foundry Engineering Soceity.
2010.10.01   Our previous post-doc, Prof.Shanping Lu has been promoted to full Professor at the Institute of Metal Research, Chinese Academy of Sciences.
 2010.10.01  A national project called the Fabrication of Airplane Parts Using Friction Stir Welding" has been kicked off.
2010.09.30    Mr Kitamura, Mr Nishida and Mr Ao made presentations on their own researches at a lab. meeting.
 2010.09.29  Mr JinMing SHEN has joined our to group as a research student from China
2010.09.25-26  We made 4 presentations at the annual meeting of the Japan Institute of Metals and Iron and Steel Institute of Japan.
2010.09.22   We had a farewell party for Dr.YoungSu who is going back to Korea->Photo studio
 2010.09.22  Dr.YoungSu Ji has received PhD degree. "Joining of Bulk Metallic Glasses and Formation of Composite Materials Using Firction Stir Processing"->Photo studio
2010.09.18   Our previous member, Mr Koji Inada visited our laboratory.
2010.09.17  Prof.Ikeshoji of the Tokyo institute of Technology visited ourlaboratory.
2010.09.17  The JICA visited our institute.
2010.09.10  Our previous member, Mr T.Ueda visited our laboratory.
2010.09.10   Five members of The Shipbuilders' Association of Japan visited our laboratory.
2010.09.9   One of our results is listed on NIKKEI news paper. "Development of System for Increase in Welding Speed." 
2010.09.9  23th: Science Direct Top 25 Hottest Articles: Materials Science and Engineering A; July-September 2010Investigation of the welding parameter dependent microstructure and mechanical properties of friction stir welded pure copper  
Materials Science and Engineering: A, Volume 527, Issue 26, 15 October 2010, Pages 6879-6886
Y.F. Sun, H. Fujii

2010.09.8    We made 9 presentations at the annual meeting of the Japan Welding Society.
2010.09.6   One of our results is listed in NIKKAN KOGYO news paper. "Reduction in Weight by FSW -Aircraft Parts".
 2010.09.6  Mr Tamadai from Tokyo National College of Technology visited our laboratory to make a collaboration. He will stay here for one week.
 2010.09.3  Mr Ao and Mr Nishida have passed the entrace examination for the mastercourse, and Ms Chen has passed the Ph.D course. Mr Ao and Mr Nishida will enter in April, 2011 and Ms Chen will enter in October, 2010.
2010.09.2  Prof.Jian Luo of Chongqing University, China visited our laboratory.
 2010.09.1  4th: Science Direct Top 25 Hottest Articles: Scripta Materialia; April-June 2010"Friction Stir Welding of High Carbon Steel with Excellent Toughness and Ductility"
Scripta Materialia, Vol.63 Issue2, July 2010, Pages 223-226
Y.D.Chung, H.Fujii et al.
 2010.08.30   Mr Nemoto and Mr Fujio has joined our laboratory. as internship students. They will be here for one week.
2010.08.23   The entrance examination for the graduate school has started. Mr Ao, Mr Nishida, Ms Chen, do your best.
2010.08.9  Mr Ji had a final exam for PhD degree. "Joining of Bulk Metallic Glasses and Fabrication of Composite Materials Using Friction Stir Processing".
 2010.08.-8.15  Summer holidays
2010.08.7    All students made presentations on their own researches at a lab. meeting.
2010.08.5   Prof.Fujii made a presentation on FSW and FSP of steels at Japan Weding Engineering Soceity.
 2010.08.5   Prof.Sun's birthday.->Photo studio
2010.07.30  A Lab. tour was held for undergraduate students.
2010.07.26   Mr Sechi from Kagoshima Prefecture Institute for Industrial Technology visited our lab to do wetting experimetns. He will stay here for one week.
2010.07.22   Prof.Fujii made a resentation on "Friction Stir Welding of Ti Alloys", at Japan Titanium Soceity.
2010.07.22  The JWRI festival was held. Our lab. served YAKISOBA (Fried noodles)..->Photo studio
 2010.07.20   We cleaned the tennis court at JWRI..
2010.07.17   Mr Shin visited our lab to be a new student.
 2010.07.16  Mr Kitamura has passeed the entrance examination for the master course. Congratulations!
 2010.07.12  We had a softball match. We lost the game by 13-12..->Photo studio
2010.07.7   Mr Kitamura mada a presentationon on"Friction Stir Welding of Ti Alloys" for the entrance examination for the master course.
2010.07.6  We practiced baseball for a competition on 12th July.
2010.07.5   Mr Ji mada a presentation for PhD degree on "Joining of Bulk Metallic Glasses and Fabrication of Composite Materials Using Friction Stir Processing".
2010.06.28   One of our results is listed on NIKKEI news paper. "Joining by Frictional Heat: a large system installed atJWRI."
2010.06.14    MJ Tech Co. Ltd., Kawanami Tekko Co.Ltd and Noda Kanagata Co.Ltd. started FSW experiments..
2010.06.11    We cleaned the tennis court at JWRI..
2010.06.08   Mr Imagawa made a presentation on "Surface Hardening of Cast Iron by Friction Stir Processing " at research group meeting of Japan Welding Society.
2010.06.07  Prof.Fujii made a invited lecture on Wetting of Ceramics by Molten Magnesium at the CIMTEC international conference in Italy.
2010.06.04   A party was held to celebrate that Mr Yoshihara and Mr Hong have recieved an official job offer from a company and to celebrate Prof.Sun's promotion to special appointed associate professor.->Photo studio
2010.06.03  Prof.Fujii made a lecture on Friction Stir Welding and Processing of Iron based alloys at a JST Forum.
2010.06.01   Prof.Sun has been promobed to Specially Appointed Assocate Professor.
2010.05.27   Prof.Fujii made a invited lecture on "Relationship between triple line movement and wetting in MgO/Al and MgO/Mg systems" at theInternational Symposium on Triple Line in France.
2010.05.23   Prof.Fujii made a presentation on "Microstructure Control of a Joint by Friction Stir Powder Processing (FSPP)" at annal meeting of Japan Light Metal Insititute.
2010.05.22   Mr Imagawa made a presentation on "Surface Hardening of Cast Iron by Friction Stir Processing " at annal meeting of Japan Foundry Engneering Society.
2010.05.20   Prof.Fujii and Dr Morisada made a presentations at the FSW International Symposium in Germany.
2010.05.19   Dr Chung, Prof.Miyano and Prof.Sun made a presentations at the FSW International Symposium in Germany.
2010.05.17   Ms Kamii has started to work at Baika University.
2010.05.14   We had a barbeque party at JWRI.
2010.04.30-
05-01
 
 Icho Festival was held to open our institute to public. We were in charge of this festival.
2010.04.23   Prof.Fujii made a lecture on Friction Stir Welding of Steels at a Forum of Japan Welding Exhibition.
2010.04.22   Mr Tomoaki Miyazawa (D2) made a presentation on Development of Ir Based Tool for Friction Stir Welding of High Temperature Materials, Prof.Y.F Sun on Effect of SiC Particles on the Microstructure and Mechanical Properteis of Friction Stir Welded Pure Copper, Prof.H.Fujii on Effect of Gap and Improvement of Mechanical Properties by Friction Stir Powder Processing at the anual meetinf of the Japan Welding Society.
 2010.04.21  Mr Y.S. Ji (D3) made a presentation on DissimilarJoining of ZrBased Metallic Glass and Pure Al by Friction Stir Welding, and Mr Y.D. Chung (D3) made a presentation on Dissimilar Lap Friction Stir Welding of Reduced Activation Ferrtic Steel F82H/Austenite Stainless Steel at the anual meetinf of the Japan Welding Society.
2010.04.21   Prof.Fujii received TANAKA KIKUNDO award.for studies on AA-TIG from Japan Welding Society.
2010.04.21  One of our results is listed on 1st page of NIKKAN KOGYO news paper. "Friction Stir Welding of Mo.
2010.04.16  Prof.Hangai from Gumma University and Prof.Miyano from Akita University visited our laboratory..
2010.04.13   One of our results is listed on 1st page of NIKKAN KOGYO news paper. "Hardening of Ferrtic Cast Iron.
2010.04.10  Prof.C.H.Shek of City University of Hong Kong visited our laboratory.
2010.04.09   We had a welcome party for Ms Sumikura, Mr Mousavizad, Ms Chen, Mr Inagaki and Mr Nishimotop.->Photo studio
2010.04.06  Mr Fuminori Inagaki and Ryo Nishimoto has joined to our group.
2010.04.02  Mr Mostafa Mousavizade has joined to our group from Iran.
2010.04.01   Miss Juan Chen has joined to our group from China.
 2010.03.30  Mr Hiroki HASHIKURA made a presentation on "Wettability of several hard thin films by molten pure iron", at the anual meeting of Japan Institute of Metals.
 2010.03.24   A party was held to celebrate the graduation of Mr Koji Inada, Mr Yoshiro Iwata Mr Toshiyuki Hashimoto and Miss Akiko Kamii.->Photo studio
 2010.03.23  Mr Koji Inada, Koichi Imagawa and Yoshiro Iwata has graduated from Master course..->Photo studio
2010.03.20   Ms M.Sumikura has joined to our group as a secretary.
2010.03.19   Our previous member, Mr H.Sugiyamai visited our lab..
2010.03.15    A new M1 student visited our lab to know our activities..
2010.03.14   Mr.YoungDong CHUNG made presentations for the Global COE program.
2010.03.10   A paper entitled "Effect of Gap on FSW Joint Formation and Development of Friction Powder Processing" has been pulished in Science and Technology of Joining and Welding .
2010.03.09   The Welding robot and CMT (Cold Metal Transfer) were moved. ->Photo studio
2010.03.05   Our previous member, Mr Y.Konishi visited our lab..
2010.03.03  Mr.Sangjin HONG and Mr Yukihide YOSHIHARA made presentations at the Department of Materials Science..
2010.02.28  Mr.Imagawa has passed the PhD entrance examination. He will be a PhD student for three years in our lab.
2010.02.27   Our previous member, Mr Kohno visited our lab..
2010.02.26   One of our results is listed on 1st page of NIKKAN KOGYO news paper. "Formation of Ultra High Hardness Coating"
2010.02.19   Mr K.Inada, Y.Iwata mada a presentation for their master course thesis.
2010.02.12    Our previous member, Mr Fujiuchi visited our lab. to encourage the master course students. Thank you very much.
2010.02.12   A party was held to welcome Mr.Y.Ao, Mr.K.Kitamura and Mr R.Nishida and to celebrate Mr K.Inada and Y.Iwata finished writing their master's thesis and that Prof.Fujii has been promoted.
 2010.02.09   Mr.Hiroki Hashikura and Mr.Toshiyuki Hashimoto made presentations for their graduation. Congratulations!.
 2010.02.08  Mr.Y.Ao, Mr.K.Kitamura and Mr R.Nishida have joined to our laboratory.
 2010.02.04  Mr.Imagawa made a presentation on "Friction Stir Processing of Cast Iron"for the PhD entrance examination.
 2010.02.01   Prof.Fujii has been promoted to full Professor.
2010.01.14  Prof.Fujii gave a lecture on "Friction Stir Welding and Friction Stir Processing of Iron Alloys" at a Meeting of Japan Institute of Metals and Ironand Steel Institute of Japan in Toyohashi.
 2009.12.04  Dr Insu Woo returned to POSCO in Korea after he had stayed here for one year.
 2009.11.27  Mr Shuo Wu has joined our to group as a research student from China.
 2009.09.28  Dr.Ishikawa has received PhD degree. "Development of High Speed Friction Stir Welding of Austenitic Stainless Steel Thin Plates and Evaluation of the Joints"
2009.08.01   Mr Ni has joined to our group as a research student from China.
2009.04.23 Dr Morisada and Mr Chung (D2) made presentations at the annual meeting of Japan Welding Society in Tokyo
2009.04.22 Several students visited the Tokyo Dome to watch a professional baseball game between NipponHam Fighters and Softbank Hawks. (See photo studio))
Prof.Fujii, Mr.Ishikawa (D3), Dr Ma, Mr.Inada (M2), Dr Woo (Foreign Researcher), Mr.Ji (D3), Mr.Iwata (M2) and Dr.Sun (Post-Doc) made presentations at the annual meeting of Japan Welding Society in Tokyo.
2009.04.09  Mr.Hashikura and Mr.Hashimoto has joined to our group.
2009.04.03  Mr.Hong (M1) from Korea and Mr.Yoshihara (M1) has joined to our group.
 2008.12.01  Dr Insu Woo from POSCO in Korea has joined to our group. He will stay here for one year.
  2008.8.14   Prof.Yufeng SUN has joined as a specially appointed researcher from China.

本文へジャンプ

Osaka University, Joining and Welding Research Institute, Functional Assessment Division

Department of Functional Diagnosis (Fujii Laboratory) 
TOP
Papers & Research field
Staffs & Studentss
Equipments
Photo studio
Inquire
Information on entrance exams
Links

日本語

 

Global COE Program

 Our group is a member of the Global COE Program (Center of Excellence for Advnaced Structural and Functional Materials Design) supported by the Ministry of Education, Sports, Culture, Science and Technology of Japan.

Latest Paper Lists