|
国際会議論文
| Behavior of
Superficial Oxide Film at Solid-Stae Diffusion Bonded Interface of Tin
and its Influence on Bond Strength |
Shinji
Koyama, Makoto Takahashi, Kenji Ikeuchi
12th International Symposium on Metallography
High Tatras, Slovakia 2004/4/28, Acta Metallurgica Slovakia,75-8
|
|
| Gleeble
Simulation of Mirostructure Development during Repair Welding in SQV2A
Pressure Vessel Steel |
P.Brziak,
R. Mizuno, Fukuhisa Matsuda, Kenji Ikeuchi, Makoto Takahashi
12th International Symposium on Metallography
High Tatras, Slovakia 2004/4/28, Acta Metallurgica Slovakia,363-368
|
|
| Disjunction of
Anodically-bonded Metal/Glass Interface by Application of Reverse
Voltage |
Makoto
Takahashi, Hiroyuki. Yasuda, Kenji Ikeuchi
12th International Symposium on Metallography
High Tatras, Slovakia 2004/4/28, Acta Metallurgica Slovakia,347-351
|
|
| Mechanical
Properties of Si3N4/Cu Joint
Friction-Bonded with Intermedicate Layer of Niobiam and Titanium |
Masaaki Ando,
Kenji Ikeuchi, Makoto Takahashi, Masatoshi Aritoshi
12th International Symposium on Metallography
High Tatras, Slovakia 2004/4/28, Acta Metallurgica Slovakia,341-346
|
|
| Role of Austenite
in Weld Toughness of Super Duplex Stainless Steel |
Toshio
Kuroda, Kenji Ikeuchi, Yoshihiko Kitagawa
IIW Doc. IX-2095-04. Osaka, Japan, July 12-16, (2004)
|
|
| Performance of
Aluminum/Copper Lap Joints by Friction Stir Welding |
,A.
Elrefaey, Kenji Ikeuchi, Yoshihiko Kitagawa
IIW Doc. IX-2105-04. Osaka, Japan, July 12-16
|
|
| Effects of
Interfacial Microstructure on Friction-Bonded Strength of Low Carbon
Steel to Al-Mg Alloy (AA5083) |
Naotugu
Yamamoto, Makoto Takahashi,Masatoshi Aritoshi,Kenji Ikeuchi,
IIW Doc. IX-2104-04. Osaka, Japan, July 12-16
|
|
| Effects of
Reverse Voltage on Metal/Glass Anodically-bonded Interface |
Makoto
Takahashi, H. Yasuda,,Kenji Ikeuchi,
IIW Doc. IA-1080-2004. Osaka, Japan, July 12-16
|
|
| Microstructure
Control for Joining Super Duplex Stainless Steel |
Toshio
Kuroda, Yoshihiko Kitagawa
IProc. Int. Conf. PSEA'04,Kyoto, Japan, Nov.24-26, (2004)595-600)
|
|
| Interfacial
Microstructure and Bond Strength of Frivtion -Bonded Joint of Al Alloys
to Mild Steel |
Naotugu
Yamamoto, Makoto Takahashi,T.Fukunaga , Kenji Ikeuchi, M. Fujita Kenji
Ikeuchi
56thAnnual Meeting of the Inter, Institute of , (2004)、
|
|
| Gleeble
simulation of microstructure development during repair welding in SQV2A
pressure vessel steel |
Peter Brziak, Ryoji
Mizuno, Fukuhisa Matsuda, Kenji Ikeuchi, Makoto Rakahashii
Acta Metallurgica Slovakia,
(2004)IX-2060-03. |
|
| Influence of
Alloying Elements on Sigma Phase Precipitation in Duplex Stainless Steel |
Toshio Kuroda, Kenji Ikeuchi,
Katsuyuki Nakade
DIS'03, (2003), 210-215 |
|
| Interfacial
Microstructure and Bond Strength of Friction-Bonded Joint of Al Alloys
to Mild Steel |
| Naotsugu Yamamoto, Makoto
Takahashi, Takao Fukunaga, Kenji Ikeuchi, Masashi Fujita, DIS'03,
(2003), IX-2060-03 |
|
| Development of
Microstructure of Anodically-bonded Interface between Aluminum and
Borosilicate glass |
M. Takahashi, K. Ikeuchi
Proc. 30th Anniversary Inter. Symposium on Joining and Welding Solution
to Industrial Innovation, Osaka, (2003) |
|
| Effects of
Alloying Elements on Strength of Friction-bonded Interfaces of Al
Alloys to Steel |
Naotugu Yamamoto, Makoto
Takahashi, K.enji Ikeuchii
| Proc. 30th
Anniversary Inter. Symposium on Joining and Welding Solution to
Industrial Innovation, Osaka, (2003) |
|
|
|
| Influence of
Surface Treatment on Strength on Solid-State Diffusion-Bonded Interface
of Tin |
S. Koyama, M. Takahashi, K.
Ikeuchii
Proc. 30th Anniversary Inter.
Symposium on Joining and Welding Solution to Industrial Innovation,
Osaka, (2003) |
|
| Influence of
Sigma Phase on Corrosion and Hydrogen Embrittlement of Super Duplex
Stainless Steels |
Toshio Kuroda, Yoshihiko Kitagawai
Proc. 13th Asian Pacific
Corrosion Control Conference, APCCC, (2003), 151-161 |
|
| Adhesion Characteristics of Zirconia
Composite Coating by Gas Tunnel Type Plasma Spraying |
Toshio Kuroda, Akira Kobayashi
Proc. Int. Conf. on Applied
Plasma Science, ISAP'S03,(2003),331-336 |
|
| Formation of
Interfacial Phase at a SiC/Cu Joint Friction - Bonded with Ti |
Akio Nishimoto, Katuji Akamatu,
Masaaki Ando, Makoto Takahashi, Kenji Ikeuchi, Masatoshi Aritoshi
Proc. Inter. Conf. on the
Characerization and Control of Interfaces for High Quality Advanced
Materials(ICCCI 2003), (2003),146 |
|
| Influence of
Alloying Elements on Sigma Phase Precipitation in Duplex Stainless Steel |
Toshio Kuroda , Kenji Ikeuchi ,
and katsuyuki Nakade
DIS'03, (2003), 210-215 |
|
| Interfacial
Microstructure and Bond Strength of Friction - Bonded Joint of Al
Alloys to Mild Steel |
Naotsugu Yamamoto, Makoto
Takahashi, Takao Fukkunaga, and Kenji Ikeuchi, and Masashi Fujita
DIS'03, (2003), IX-2060-03 |
|
| Glass/Al
Interfacial Reaction Induced by Application of DC Voltage |
Makoto
TAKAHASHI and Kenji IKEUCHIi
Proceedings of the International Conference on Designing of Interfacial
Structures in Advanced Materials and their Joints, p. 551 (2002) |
|
| ANODICALLY-BONDED
INTERFACE OF GLASS TO ALUMINUM |
Makoto Takahashi, Satoru
Nishikawa, Zheng Chen and Kenji Ikeuchi
IWC-Korea (2002) |
|
| Interfacial
Microstructure in Friction-Bonded Joint of Al-Mg Alloy to Steels |
M. Takahashi, T. Fukunaga, K.
Ikeuchi, M. Fujita
Proceedings of Symposium on
Metal, Casting and Welding, Seoul, Korea, 21, (2002),116-121 |
|
| Influence of
Microstructures on Mechanical Properties of Super Duplex Stainless |
T. Kuroda, Kenji Ikeuchi, Makoto
Takahashi, Yoshihiko Kitagawa
Steel Weldments, Proc. IIW Asian Pacific Int.Cong., (2002)151-161 |
|
| Internal Friction
by Hydrogen in Duplex Stainless Steel and Weld Metals |
Toshio Kuroda, Kenji Ikeuchi,
Katsuyuki Nakade
Proc.Int.Conf., on Designing of Interfacial Structures in Advanced
Materials and their Joints, DIS'02 , (2002)371-376 |
|
| Weld Toughness
and Microstructures of Duplex Stainless Steel by Three-dimensional
Fractography |
Toshio Kuroda, Kenji Ikeuchi,
Makoto Takahashi Yoshihiko Kitagawa
Proc.Int.Conf., on Designing of Interfacial Structures in Advanced
Materials and their Joints, DIS'02 , (2002)396-400 |
|
| Influences of
Heat Input and Shielding Gas Composition on Microstructure and
Properties of Weld Metal of HSLA-100 Class Steel |
M. A. Gouda, Kenji . Ikeuchiii
6th Inter.Conf.on Trends in
Welding Research, (2002) |
|
| Influences of
Heat Input and Shielding Gas Composition on Microstructure and
Properties of Weld Metal of 950 MPa Class High Strength Steel |
M. A. Gouda, M. Takahashi, T.
Kuroda, K. Ikeuchiii
55th Annual Assembly of IIW,
Copenhagen, Denmark, IIW Doc, IX-2023-02, (2002) |
|
| Microstructure of
Glass/Metal Interface in Anodically-Bonded Joint |
Makoto TAKAHASHI and Kenji IKEUCHI
Joining of Advanced and
Specialty Materials IV, (2002) |
|
| Friction-Bonded
Interfaces of Al-Mg Alloy to Steels |
M. Takahashi, T. Fukunaga, K.
Ikeuchi, M. Fujita
6th International Conference on
Trends in Welding Research, Pine Mountain (2002) |
|
| Influence of
Microstructure on Mechanical Properties of Super Duplex Stainless |
Toshio Kuroda, Kenji Ikeuchi,
Makoto Takahashi, and Yoshihiko Kitagawa
Steel Weldments Proc., II Asian
pacific Int. Cong., (2002), 151-161 |
|
| Glasss/Al
Inerfacial Reaction Inducd by Application of DC Voltage |
Makoto Takahashi, Kenji Ikeuchi
Proc. Int. \\conf. on Desighning of Interfacails Structures in Advanced
Materials and their Joints, DIS'02 (2002). 551-556 |
|
| Debonding of
Anodically-bonded Joint by Application of Opposite Polarity |
Makoto Takahashi, Satoru
Nishikawa and Kenji IkeuchiI
Proceedings of the 7th
International Symposium of Japan Welding Society,2,(2001),.851-856 |
|
| Microstructures
of GMA Weld Metal of 950 MPa Class Steel |
Mohammed Gouda, Makoto Takahashi,
Toshio Kuroda and Kenji Ikeuchi
Proceedings of the 7th
International Symposium of Japan Welding Society, 2, (2001),815-82 |
|
| Effect of
Simulated Welding Cycles on Microstructure Changes in 1.5Mn-0.5Mo Low
Alloy Steel |
Josef Janovec, Makoto Takahashi,
Toshio Kuroda and Kenji Ikeuchi
Acta Metallurgica
Slovaca,,(2001),.2001-204 |
|
| Microstructure of
Joint Interface in Anodic-bonded Glass/metal Interfaces |
Makoto Takahashi and Kenji Ikeuchi
Acta Metallurgica Slovaca,
(2001), .200-204 |
|
| Fractographic and
Micorstructural Aspects of Tempered ICCGHAZ of SQV-2A Low Alloy Steel
Weld |
Josef JANOVEC, Makoto TAKAHASHI,
Toshio KURODA ands Kenji IKEUCHI
Proceedings of the
International Conference FT\RACTOGRAPHY 2000, p. 123 |
|
| Sigma Phase
Embrittlement of Duplex Stainless Steel |
L Pesak,
T.Kuroda, and K. Ikeuchi
Proc.10th Inter. Symp.. Metallagraphy 98 , High Tatros, Slovakia,
(1998),237-239 |
|
| Microstructure of
Diffusion-Bonded Interface of Aluminum Alloy |
K. Kotani,
K. Ikeuchi, and F. Matsuda
Proc.10th Inter. Symp. Metallography'98, High Tatras, Slovakia,
(1998), pp. 209-212 |
|
| Interfacial
Microstructure and Mechanical Properties of SiC/Cu Joint
Friction-Bonded with Intermediate Layer |
M. Ando, A.
Nishimoto, M. Aritoshi, and K. Ikeuchi
Proc.10th Inter. Symp. Metallography'98, High Tatras, Slovakia,
(1998), pp. 370-374 |
|
Welding
Metallurgy in Japan
--Embrittlement and Microstructure of Steel Weld HAZ-- |
K. Ikeuchi
Japanese-German-Information Exchange Meeting,
Frieburg, Germany, (1998) |
|
| Round Robin Test
on HAZ Microstructure |
T. Kojima,
N. Yurioka, T. Kasuya, C. Shiga, K. Ikeuchi, and M. Takahashi
51st Annual Assembly of IIW, Hamburg, Germany, (1998),
IIW Doc.IX-1902-98 |
|
| Formation of
Helium Bubble in YAG Laser Weldment of Helium-Doped Stainless Steel |
T.Kuroda
and Ｋ.Ikeuchi
51st Annual Assembly of IIW, Hamburg,Germany, (1998),
IIW Doc. IX-1907-98 |
|
| Effect of
Alloying Elements on Interfacial Oxide in Diffusion-Bonded Joint of Al
Alloys |
K. Kotani,
J.P. Jung, K. Ikeuchi, and F. Matsuda
51st Annual Assembly of IIW, Hamburg, Germany, (1998),
IIW Doc.IX-1906-98 |
|
| Microstructure
and Bond Strength of Ceramics Interface by Friction Bonding |
A.
Nishimoto, M. Takahashi, T. Kuroda, and K. Ikeuchi
ECOMAP-98, (Inter. Symp. Enviromental, Consious Innovative
Materials Processing with Advanced Energy Sources),
Kyoto, Japan, (1998), pp. 418-423 |
|
| Helium-Induced
Cracking in YAG Laser Weldment of Stainless Steel Doped by Helium Ion
Implantaion |
T.Kuroda
and K. Ikeuchi
ECOMAP-98, (Inter.Symp.Enviromental Consious Innovative
Materials Processing with Advanced Energy Sources),
Kyoto, Japan, (1998), pp. 434-439 |
|
| Toughness of
Single and Multi-Pass Weld HAZs of SQV-2A Pressure Vessel Steel |
F. Matsuda,
K. Ikeuchi, and J. Liao
Proc.7th Inter. Symp. Physical Simulation of Casting Hot Rolling and
Welding ISPS, Tsukuba, Japan, (1997), pp. 299-308 |
|
| Interfacial
Phenomena in Field-Assisted Bonding and Debonding Processes of
Glass-Kovar Alloy Joint |
K. Ikeuchi,
M.A. Morsy, K. Ishizaki, and M. Ushio
Proc. 5th Inter. Conf. Joining Ceramics, Glass and Metal,
Jena, Germany, (1997), pp. 88-92 |
|
| Effect of
Reactive Metals on Friction Bonding of Ceramics to Metal |
K. Ikeuchi,
A. Nishimoto, and H. Fujii
Seminar Handbook on Advances in Welding & Related Technology,
TWI, Cambridge, UK. (1997) |
|
| Effects of
Interfacial Phase on Joint Strength of Diffusion-Bonded Aluminum Alloys |
K. Kotani,
K. Ikeuchi, and F. Matsuda
50th Annual Assembly of IIW, SanFrancisco, USA., (1997), IX-1874-97 |
|
| Fundamentals of
Glass-Metal Bonding by Electrostatic Field |
M.A. Morsy,
K. Ishizaki, K. Ikeuchi, and M. Ushio
50th Annual Assembly of IIW, SanFrancisco, USA., (1997), IX-1875-97 |
|
| Sintering of TaC
and TaC-HfC Electrodes by rf Plasma |
M. Ushio,
K. Ikeuchi, and M. Tanaka
Inter. Symp. Microwave Plasma and Theermochemical Processing
of Advanced Material, (1997), Osaka, Japan, pp. 23-24 |
|
| YAG Laser Welding
of Stainless Steel Helium-Doped by Means of Helium Implanting Technique |
T.Kuroda
Proc. Inter. Conf. ISAPEU97 (Institute of Applied Plasma Science),
Loss Angels, USA, (1997), pp. 143-150 |
|
| Sigma Phase
Embrittlement of Duplex Stainless Steel Weld Metal |
T.Kuroda
and Y.Kikuchi
Proc. Inter. Conf. Joining of Materials (JOM4),
Helsingor, Denmark, (1997), pp. 125-135 |
|
| Toughness of
Single and Multi-Pass Weld HAZs of SQV-2A Pressure Vessel Steel |
F. Matsuda,
K. Ikeuchi, and J. Liao
Proc.7th Inter. Symp. Physical Simulation of Casting Hot Rolling and
Welding ISPS, Tsukuba, Japan, (1997), pp. 299-308 |
|
| Interfacial
Phenomena in Field-Assisted Bonding and Debonding Processes of
Glass-Kovar Alloy Joint |
K. Ikeuchi,
M.A. Morsy, K. Ishizaki, and M. Ushio
Proc. 5th Inter. Conf. Joining Ceramics, Glass and Metal,
Jena, Germany, (1997), pp. 88-92 |
|
| Effect of
Reactive Metals on Friction Bonding of Ceramics to Metal |
K. Ikeuchi,
A. Nishimoto, and H. Fujii
Seminar Handbook on Advances in Welding & Related Technology,
TWI, Cambridge, UK. (1997) |
|
| Effects of
Interfacial Phase on Joint Strength of Diffusion-Bonded Aluminum Alloys |
K. Kotani,
K. Ikeuchi, and F. Matsuda
50th Annual Assembly of IIW, SanFrancisco, USA., (1997), IX-1874-97 |
|
| Fundamentals of
Glass-Metal Bonding by Electrostatic Field |
M.A. Morsy,
K. Ishizaki, K. Ikeuchi, and M. Ushio
50th Annual Assembly of IIW, SanFrancisco, USA., (1997), IX-1875-97 |
|
| Sintering of TaC
and TaC-HfC Electrodes by rf Plasma |
M. Ushio,
K. Ikeuchi, and M. Tanaka
Inter. Symp. Microwave Plasma and Theermochemical Processing
of Advanced Material, (1997), Osaka, Japan, pp. 23-24 |
|
| YAG Laser Welding
of Stainless Steel Helium-Doped by Means of Helium Implanting Technique |
T.Kuroda
Proc. Inter. Conf. ISAPEU97 (Institute of Applied Plasma Science),
Loss Angels, USA, (1997), pp. 143-150 |
|
| Sigma Phase
Embrittlement of Duplex Stainless Steel Weld Metal |
T.Kuroda
and Y.Kikuchi
Proc. Inter. Conf. Joining of Materials (JOM4),
Helsingor, Denmark, (1997), pp. 125-135 |
|
| Interfacial Oxides in Diffusion-Bonded
Joints of Al-Mg Alloys |
K. Kotani, K. Ikeuchi, and F.
Matsuda
Proc. 6th Inter. Welding Symp., Japan Welding Soc.,Nagoya, Japan,
(1996), pp. 95-100 |
|
| Behavior of Helium Bubble in Laser
Weldment of Helium-doped Stainless Steel |
T.Kuroda, F.Matsuda, H.Yin,
J.Liao, and Y.Fujiya
Proc. Inter. Conf. Welding Science and Technology and
Japan-Slovakia Welding Symposium, High Tatras Mountains, Slovakia,
(1996) , pp.140-146 |
|
| Bonding and Debonding Phenemena in
Anodic Bonding of Glass to Metal |
M.A.Morsy, K. Ikeuchi, M. Ushio,
and K. Ishizaki
Proc.6th International Welding Symp., Japan Welding Soc.,
Nagoya, Japan, (1996), pp.701-706 |
|
| Displacive Phase Transformations in
Fe-Rh Alloys |
R. Oshima, M. Takahashi, N.
Takahara, and S. Ochi
Proc. Inter.Conf.Displacive Phase Transformations and
their Applications in Materials Engineering,
Urbana, Ilinois, USA., (1996), pp. 207-213 |
|
|
 |
