¡HOME

Abstract

In order to further reduce the weight, extend the life, and improve the strength and toughness of structural materials, it is essential to establish the reliability of each material including lightweight materials and actively promote the multi-materialization of materials that consist of the right materials in the right place.

In the NEDO-ISMA project, Osaka University (Joining and Welding Research Institute and Graduate School of Engineering) has conducted "Fundamental Research for Friction Joining (46)", " Fundamental Research on Multi-Material Joining Technologies (64)", and gDevelopment of Joint Performance Data-Base for Joining Technologies of Multi-Materials (64-B)" from 2013.

To utilize the new joining methods, and the data created and accumulated through these technological developments , "Joining Technology Hub" has been formed.

By using "Only one and number one" new joining methods, analysis technology, intellectual property developed at Osaka University as technical seeds, "Joining Technology Hub" will collaborate with companies and academic institution and conduct joint research and joint development aimed for practical applications .


NEWS & TOPICS
(2023.1.11)
NEWS
At "The Japan Welding Society National Meeting 2022", following members were awarded.
yJapan Welding Society Research-Presentation-Awardz
 <spring>
 TitleFDissimilar material joining using center drive double-sided LFW
 PresenterFTetsuro ITOH
 (Joining and Welding Research Institute Osaka University)
 TitleFRelationship between microstructure and deformation behavior of friction stir  welded duplex stainless steel stirrer
 PresenterFTakayuki YAMASHITA
(Joining and Welding Research Institute Osaka University)
 <autumn>
 TitleFElucidation of welding mechanism and application for steel material of Inclined tool using FSW method.
 PresenterFAtsushi NOGUCHI
 (Joining and Welding Research Institute Osaka University)  
yJapan Welding Society Poster-Presentation-Awardz
 TitleFLFW of 980MPa grade hot-dip galvannealed steel sheets
 PresenterFMasatoshi UOZUMI
 (Joining and Welding Research Institute Osaka University)
yJapan Light Metal Welding Association AWARDz
 TitleFDissimilar material welding of copper and aluminum using pressure-controlled joule heat forge welding method
 PresenterFYasuhiro HASHIMOTO
 (Joining and Welding Research Institute Osaka University)

(2023.1.4)
TOPIX
Page of " Paper and announcement" was updated.

(2022.11.9)
NEWS
In JSTnews(2022/11 issue) , as the result of JST-Mirai Program following technology of Professor Hidetoshi FUJII(etc.) was published.
y"Low temperature welding" which maintains strength characteristics of each welded metal material. :This new technology contributes power saving and waste reductionz
Please refer following URL
https://www.jst.go.jp/
AbstractF
https://www.jst.go.jp/pr/jst-news/backnumber/2022/202211/pdf/2022_11_p8-11.pdf
JST-Mirai Program
New Technology Presentation Meeting(2021/05/28(Fri.))
Presentation https://shingi.jst.go.jp/pdf/2021/2021_mirai_2.pdf
Movie  https://www.youtube.com/watch?v=ybW2uMjFE9U

From left to right
Joining and Welding Research Institute Osaka University Vice Director Professor
JST-Mirai Program Project Leader (from 2019)
Hidetoshi FUJII
DAIHEN Corporation Senior Vice President
Tomoyuki UEDA
Joining and Welding Research Institute Osaka University Doctoral course
Takumi AIBARA

(2022.8.24)
TOPIX
Page of " Paper and announcement" was updated.

(2022.7.27)
TOPIX
Page of "Intellectual property and patent" and" Paper and announcement" were updated.

(2022.7.11)
NEWS
"Solid  Phase Co. Ltd." which members (H. Fujii and Y. Morisada) of Joining Technology Hub participate as directors was founded 2022.6.1.
Business content
 Sales of Friction stir welding apparatus
 Trial production of joint by solid phase welding
 Consultant for welding technique
 Material for high-performance blade and high-performance blade
Solid  Phase Co. Ltd.
http://solidphase.co.jp/index.html

(2022.7.6)
NEWS
Research and development project of innovative new structural materials
uISMA Achievement presentation—OSAKA UNIVERSITYv`Multi-material Welding`
will be held as follows. Your attendance is highly appreciated.
https://isma.jp/caravan_osaka/
Date and timeF2022/8/1iMonj13:10`y12:40 Start acceptingz
VenueFOSAKA UNIVERSITY Joining and Welding Research Institute
ARATA HALL i11-1, Mihogaoka, Ibaraki, Osaka, 567-0047, Japanj
CapacityF60iResticted for prevention of spread of new coronavirus infectionj
LanguageFJapanese
Entry feeFFree of chargeiOpen to the public,Pre-registration systemj
OrganizerFInnovative Structural Materials AssociationiISMAj
Co-sponsoredFOSAKA UNIVERSITY
This ISMA Achievement presentation was held online because of spread of new corona infection.

(2022.4.28)
TOPIX
Page of " Paper and announcement" was updated.
TOPIX
Member pege was updated (new member and new photo).

(2022.4.18)  
TOPICS
English page was released.

(2022.4.13)
TOPICS
Page of " Paper and announcement" was updated.
TOPICS
In the website of "The Innovative Structural Materials Association (ISMA) " the page of "Hub for utilizing data" was released.
In this page the website of "Joining Technology Hub" is introduced.
https://isma.jp/randd/hub/

(2022.3.16)
TOPICS
Page of " Paper and announcement" was updated.

(2021.12.27)
NEWS
At archive of New Technology Presentation Meetings of "Japan Science and Technology Agency(JST)", "Solid phase resistance spot joining technology enables joning between poorly joinable material" of Professor Fujii ranked in.
https://www.youtube.com/channel/UCtdkmA70BsryBmXEAJzEbnQ/videos?view=0&sort=p&flow=grid

(2021.12.22)
NEWS
Japan Light Metal Welding Association 2021 Annual Lecture Meeting Achievement presentation
Excellent presentation award (Announcement date: 2021/12/7)
Winner: Mr.LIM
Theme: Solid phase welding of light metal and steel(dissimilar material) by pressure control voltage welding method

(2021.12.22)
NEWS
JAPAN WELDING SOCIETY 2021 Autumn Meeting poster session
Japan Light Metal Welding Association AWARD (Announcement date: 2021/9/22)
Winner: Mr.ITO, Mr.KAMAI,Mr.MORISADA,Mr.FUJII
Theme: Development of center drive linear friction welding which enables both sides simultaneous welding
Winner: Mr.OHTA, Mr.MORISADA,Mr.KAMAI, Mr.FUJII
Theme: 3D in-situ observation of friction welding phenomenon by high brightness transmitted X-ray apparatus

(2021.12.06)
NEWS
"Solid phase resistance spot welding method" by Fujii(Prof.) etc. was published in Nikkan Kogyo Shimbun as of 2021.12.06. Login required
https://www.nikkan.co.jp/spaces/view/0062454

(2021.10.06)
NEWS
Pro.Fujii will give a lecture on "New welding method for realization of Multi-material " in "2021 Multi-material symposium" as part of collaboration with "AIST Multi-material reliability Hub"
Date and timeF2021.11.25.(Thuj 13F30-17F20
Holding methodFOnline meeting on Microsoft Teams
Capacity:100, Free of charge
https://unit.aist.go.jp/mmri/ja/events/mmrisympo2021.html

(2021.07.31)
NEWS
"Solid phase resistance spot welding method" by Fujii(Prof.), Morisada(S. A. Assoc. Prof.),Kamai(S. A. Res.) and Aibara(S. A. Res.) was published in Nikkan Kogyo Shimbun as of 2021.07.30. Login required.
https://www.nikkan.co.jp/articles/view/607005

(2021.07.28)
TOPICS
Page of " Paper and announcement"," Intellectual property and Patent"and "Member" were updated.

(2021.05.31)
TOPICS
Website of  "Joining Technology Hub" was released.