■Paper and announcement
| Auther | Title | Name of the magazine | Belongs | Date |
|---|---|---|---|---|
| F.Miyasaka |
Development of LFW process model by particle method |
Tetsu-to-Hagane,Vol 108, No. 12, (2022). |
Osaka University | 2022/12/1 |
| M.UOZUMI, Y.MORISADA, H.FUJII |
Applied pressure-controlled liner friction welding of galvanized steel sheet |
Quarterly Journal of The Japan Welding Society, 40(4), (2022) |
Osaka University | 2022/11/15 |
| T.ITOH, M.KAMAI, Y.MORISADA, H.FUJII |
Dissimilar material joining of Cu and Al-alloy using center drive bothside LFW |
Quarterly Journal of The Japan Welding Society, 40(4), (2022) |
Osaka University | 2022/11/15 |
| Abhishek Sharma*, Yoshiaki Morisada*, Hidetoshi Fujii* |
Investigation of through- thicknessmicrostructural evolution and mechanicalproperties variation in friction stir alloyedAl-Fe alloy system |
Journal of Alloys and Compounds,921, (2022), 166154. |
Joining and Welding Research Institute, Osaka University |
2022/11/15 |
| Y.Sugimoto* S.Mineoka* H.Serizawa** |
Friction stir spot welding of aluminum alloy and CFRP and its weld bond |
JOURNAL OF THE JAPAN INSTITUTE OF LIGHT METALS, Vol.72, No.10,pp1-5 |
*Hiroshima University **Osaka University |
2022/10 |
| H．Serizawa |
Study on analysing method of steel/aluminum alloy dissimilar material joining process of resistance spot welding method |
The Japan Institute of Metals and Materials Annual Autumn Meeting 2022 (171th) |
Osaka University |
2022/9/22 |
| H．Serizawa |
Study on Tensile Shear Strength and Shear Fatigue Property of Advanced Multi- Material Dissimilar Lap Joint |
Joining of Advanced and Speciality Materials (JASM XXII), International Materials, Applications & Technologies 2022, IMAT2022,) |
Osaka University |
2022/9/12- 15 |
| H．Serizawa |
Development of test method for corrosion fatigue property evaluation of multi-material lap joining of dissimilar materials and adhesive joint |
The Japan Welding Society National Meeting 2022(autumn) |
Osaka University |
2022/9/9 |
| Y. HASHIMOTO Y. KAMAI Y. MORISADA H. FUJII |
Dissimilar material welding of copper and aluminum using pressure-controlled joule heat forge welding method |
The Japan Welding Society National Meeting 2022 (autumn) p. 338-339 |
Joining and Welding Research Institute Osaka University |
2022/09/ 08 - 2022/ 09/10 |
| M. UOZUMI* Y.MORISADA* H. FUJII* H.HIRATA** H.FUJIMOTO*** |
LFW of 980MPa grade hot-dip galvannealed steel sheets |
The Japan Welding Society National Meeting 2022 (autumn) p. 68-69 |
*Joining and Welding Research Institute Osaka University **Graduate School of Enginieering Osaka University **NIPPON STEEL CORPORATION |
2022/09/ 08 - 2022/ 09/10 |
| A. NOGUCHI T. OGURA M.MUKUDA Y.MORISADA H. FUJII |
Elucidation of welding mechanism and application for steel material of Inclined tool using FSW method. |
The Japan Welding Society National Meeting 2022 (autumn) p. 104-105 |
Joining and Welding Research Institute Osaka University |
2022/09/ 08 - 2022/ 09/10 |
| H．Serizawa |
Study on Mechanical Properties of Advanced Multi- Material Dissimilar Lap Joints |
Proceedings of IIW2022 - International Conference on Welding and Joining, pp.567-570. |
Osaka University |
2022/7/18 |
| Abhishek Sharma*, Yoshiaki Morisada*, Toru Nagaoka**, Hidetoshi Fujii* |
Influence of the number of FSP passes on the strength- ductility synergy of cold-rolled spark plasma sintered pure aluminum |
Journal of ManufacturingProcesses, 79,(2022), Pages 296-304. |
* Joining and Welding Research Institute, Osaka University, **Osaka Research Institute of Industrial Science and Technology |
2022/7/1 |
| N.Takeoka*,**, T.Miyama*, T.Matsuda*, T.Ogura*, R.Ohashi**, A.Hirose* |
Development of aluminum alloy/ galvanized steel joining method using refill friction stir spot welding |
Welding International, 36, 370-378, 2022 |
* Osaka University **Kawasaki Heavy Industries, Ltd. |
2022/7 |
| Peihao Geng* Masashi Morimura*, Song Wu* Yong Liu* Yunwu Ma* Ninshu Ma* Yasuhiro Aoki* Hidetoshi Fujii* Hong Ma** Gupliang Qin** |
Prediction of residual stresses within dissimilar Al/steel friction stir lap welds using an Eulerian-based modeling approach |
Journal of Manufacturing Processes, 79 (2022) 340-355. |
* Joining and Welding Research Institute, Osaka University, ** School of Material Science and Engineering, Shandong University |
2022/6/15 |
| Peihao Geng* Masashi Morimura*, Hong Ma** Yunwu Ma* Ninshu Ma* Huihong Liu* Yasuhiro Aoki* Hidetoshi Fujii* Gupliang Qin* |
Elucidation of intermetallic compounds andmechanical properties of dissimilar frictionstir lap welded 5052 Al alloy and DP590steel |
Journal of Alloys and Compounds, 906, (2022), 164381, 1-17. |
* Joining and Welding Research Institute, Osaka University, ** School of Material Science and Engineering, Shandong University |
2022/6/15 |
| K.IKUSHIMA, Y.YAMAUCHI, Z.LI, Y.KITANI, M.KUKI, M．SHIBAHARA |
Study on effect of tool-shape on mechanical behavior during friction stir welding using numerical simulation |
Tetsu-to-Hagane, Vol 108, No.12, (2022). |
Osaka Metropolitan University |
2022/6/10 |
| Yasuyuki Miyano*, Hiroki Washiya*, Hiromu Sato*. Yoshihiro Aoki**, Mitsuhiko Kimura** *, Kohsaku Ushioda**, Hidetoshi Fujii** |
Friction Stir Welding of 1.4 GPa -grade Tempered Martensitic Steel |
Tetsu-to-Hagane, Vol 108, No.12, (2022). |
*Akita University **Osaka University ***Akita Industrial Technology Center |
2022/6/10 |
| Abhishek Sharma*, Yoshiaki Morisada*, Toru Nagaoka**, Hidetoshi Fujii* |
Enhanced strength-ductility combinationin the cold-rolled spark plasma sinteredpure aluminium by FSP |
Materials Characterization,188, (2022) 111914. |
* Joining and Welding Research Institute, Osaka University, **Osaka Research Institute of Industrial Science and Technology |
2022/6/1 |
| N.Takeoka*,** T.Tsuchidaa*, T.Matsuda* T.Ogura* R.Ohashi**, A.Hirose* |
Analysis of Local Characteristics and Microstructure of Dissimilar Metal Interface in Scrubbing Refill Friction Stir Spot Welding Joint |
Quarterly Journal of The Japan Welding Society, 40, 77-87 (2022) |
* Osaka University **Kawasaki Heavy Industries, Ltd. |
2022/6 |
| S.Fujita |
Dissimilar material welding and galvanic corrosion |
Journal of the Japanese Society for Strength and Fracture of Materials(special issue) Material strength and destruction, symposium collection of papers(63rd) pp.19-26 |
ISMA | 2022/5/27 |
| Peihao Geng* Ninshu Ma* Hong Ma*** Yunwu Ma* Kazuki Murakami* Huihong Liu* Yasuhiro Aoki* Hidetoshi Fujii* |
Flat friction spot joining of aluminum alloyto carbon fiber reinforced polymer sheets: Experiment and simulation |
Journal of Materials Science &Technology, Volume107, (2022), p.266-289. |
* Joining and Welding Research Institute, Osaka University, ** Institute of Scientific and Industrial Research, Osaka University, *** School of Mechanical and Aerospace Engineering, Queen's University |
2022/4/30 |
| H.Serizawa |
Study on tensile shear strength of laminated dismilar welding joint using 1.5GPA class ultra high strength steel |
The Japan Welding Society National Meeting 2022(spring) |
Osaka University |
2022/4/13 |
| T.YAMASHITA K.USHIODA Hi.FUJII |
Relationship betweenmicrostructure anddeformation behavior of frictionstir welded duplex stainlesssteel stirrer | The Japan Welding SocietyNational Meeting 2022(spring) p. 116-117 |
Joining andWelding ResearchInstitute OsakaUniversity | 2022/04/13 - 2022/04/20 |
| Tetsuro ITOH Masayoshi KAMAI Takuya MIURA Yoshiaki MORISADA Hidetoshi FUJII |
Dissimilar material joining usingcenter drive double-sided LFW | The Japan Welding SocietyNational Meeting 2022(spring) p. 96-97 |
Joining andWelding ResearchInstitute OsakaUniversity | 2022/04/13 - 2022/04/20 |
| Z. Zeng 1, M.hou2, 3, MarcoEsmaily 4 Y. Zhu 4, S.Choudhary 4, J.s C. Griffith 4, J. Ma 4 Y. Hora 4 Y. Chen 4, Alessio .ngyu Shi 2 H.Fujii 3 N.Birbilis1 |
Corrosion resistant and high-strength dual-phase Mg-Li-Al-Zn alloy by friction stirprocessing |
Communications Materials 3, Article number:18 (2022) |
1 Australian National University. 2 Tsinghua University. 3 Joining and Welding Research Institute (JWRI), Osaka University 4 Monash University. |
2022/4/6 |
| N.Takeoka*,** T.Miyama*, T.Matsuda* T.Ogura* R.Ohashi**, A.Hirose* |
Mechanical Properties of Weld Bonded Joint in New Dissimilar Metal Joining Method Using Refill Friction Stir Spot Welding |
Journal of Light Metal Welding60, 14-21 (2022) |
* Osaka University **Kawasaki Heavy Industries, Ltd. |
2022/4 |
| Naoki Takeoka*,** Taisuke Tsuchida* Tomoki Matsuda* Tomo Ogura* Ryoji Ohashi* Akio Hirose* |
Analysis of Mechanical Properties of Dissimilar Material Joint Using Scrubbing Refill Friction Stir Spot Welding |
Journal of Advanced Joining Processes Available Online(100112) |
* Osaka University **Kawasaki Heavy Industries, Ltd. |
2022/4 |
| Peihao Geng* Yunwu Ma* Ninshu Ma* Hong Ma*** Yasuhiro Aoki* Huihong Liu* Hidetoshi Fujii* |
Effects of rotation tool- induced heat and material flow behaviour on friction stir lapped Al/steel joint formation and resultant microstructure |
International Journal of Machine Tools and Manufacture Volume 174, 103858 |
* Joining and Welding Research Institute, Osaka University, ** Institute of Scientific and Industrial Research, Osaka University, *** School of Mechanical and Aerospace Engineering, Queen 's University |
2022/3/1 |
| Akio HIROSE |
Welding technology for muti- materials structures |
Die and mould technology(The Nikkan Kogyo Shimbun) Vol.37(2022), No.3, p.18-21 |
Osaka University |
2022/3 |
| Abhishek Sharma, Yoshiaki Morisada, Hidetoshi Fujii |
Through-Thickness Localized StrainDistribution and Microstructural Characterization of Functionally Graded Al/GNP Composite Fabricated by FrictionStir Processing |
Light Metals 2022, pp 274-282 |
Joining and Welding Research Institute, Osaka University |
2022/2/5 |
| Tohru Okada, Masanori Yasuyama, Masato Uchihara, Hidetoshi Fujii* |
Effect of paint baking thermal cycle onjoint strength of spot welds |
WELDING INTERNATIONAL Volume 36, 2022 - Issue 2 76-86 |
Nippon Steel Corporation, * Joining and Welding Research Institute, Osaka University |
2022/2/2 |
| Xiaopei Wang, Yoshiaki Morisada, Kohsaku Ushioda, Hidetoshi Fujii |
Double-sided friction stir spot welding ofultra-high strength C -Mn-Si martensiticsteel by adjustable probes |
Journal of Materials Processing Technology Volume 300,February 2022, 117422 |
Joining and Welding Research Institute, Osaka University |
2022/2/1 |
| H. Yamamoto, S. Koga, K. Ito, Y. Mikami |
Fatigue strength improvement due toalloying steel weld toes with WC toolconstituent elements through friction stirprocessing |
The international journal of advanced manufacturing technology 119, 6203-6213 (2022) |
Joining and Welding Research Institute, Osaka University |
2022/1/19 |
| Abhishek Sharma, Yoshiaki Morisada, Hidetoshi Fujii |
Bending induced mechanical exfoliation of graphene interlayers in a through thickness Al-GNP functionally graded composite fabricated via novel single-step FSP approach |
Carbon 186, 475-491 |
Joining and Welding Research Institute, Osaka University |
2022/1/1 |
| Tomoki Matsuda*, Toshiya Ogaki*, Kotaro Hayashi*, Chihiro Iwamoto**, Takashi Nozawa***, Mitsuru Ohata*, Akio Hirose* |
Fracture dominant in friction stir spot welded joint between 6061 aluminum alloy and galvannealed steel based on microscale tensile testing |
Materials & Design 213, (2022)110344 |
* Osaka University ** Ibaraki University *** National Institutes for Quantum Science and Technology (QST) |
2022/1 |
| N.Takeoka*,**, T.Miyama*, T.Matsuda*, T.Ogura*, R.Ohashi**, A.HIrose* |
Development of Aluminum Alloy/Galvanized Steel Joining Method Using Refill Friction Stir Spot Welding |
Quarterly Journal of The Japan Welding Society, 39(4), (2021), 379-385 |
*Osaka University **Kawasaki Heavy Industries, Ltd. |
2021/12/28 |
| H.SERIZAWA* K.INOSE** R.OHASHI*** Y.SUGIMOTO**** T.MINODA***** T.MURAKAMI***** * |
Evaluation of tensile shear fatigue characteristics of multi- material dissimilar joint |
Paper from"Welding technology 2021 in advanced automotive production technology" in JAAA2021Symposium 130-137 |
*OSAKA UNIVERSITY **IHI Corporation ***Kawasaki Heavy Industries, Ltd. ****HIROSHIMA UNIVERSITY *****UACJ Corporation ******Kobe Steel, Ltd. |
2021/12/1 |
| H.SERIZAWA* K.INOSE** R.OHASHI*** Y.SUGIMOTO**** T.MINODA***** T.MURAKAMI***** * |
Evaluation of shear fatigue characteristics of multi- material dissimilar joint |
Paper from"Welding technology 2021 in advanced automotive production technology" in JAAA2021Symposium 147-153 |
*OSAKA UNIVERSITY **IHI Corporation ***Kawasaki Heavy Industries, Ltd. ****HIROSHIMA UNIVERSITY *****UACJ Corporation ******Kobe Steel, Ltd. |
2021/12/1 |
| N.Takeoka*,**, T.Tsuchida* T.Matsuda*, T.Ogura*, R.Ohashi**, A.Hirose* |
Application of scrubbing double- acting friction stir welding for the welding of aluminum alloy/ ultra high tension steel |
Japan Light Metal Welding Association Vol. 60, pp.21-28 |
Osaka University | 2021/12 |
| T.ITOH, M.KAMAI, Y.MORISADA, H.FUJII |
Dissimilar material joining of Cu and Al-alloy using center drive bothside LFW |
Paper from"Welding technology 2021 in advanced automotive production technology" in JAAA2021Symposium 34-37 |
Joining and Welding Research Institute, Osaka University |
2021/11/12 |
| Eri Ota, Tomoki Matsuda, Hiroto Shoji, Tomo Ogura, Fumikazu Miyasaka, Tomokazu Sano, Mitsuru Ohata, Akio Hirose |
Friction stir spot welding of aluminum and carbon fiber reinforced thermoplastic using hybrid surface treatment improving interfacial properties |
Materials & Design Volume 212, 110221 |
Osaka University | ONLINE： 2021/11/6 Publish： 2021/12/15 |
| Hidetoshi Fujii | LFW（Lenear friction welding） | JAPAN WELDING SOCIETY 90(7) 39-48 |
Joining and Welding Research Institute, Osaka University |
2021/10/18 |
| H.SERIZAWA* K.INOSE** R.OHASHI*** Y.SUGIMOTO**** T.MINODA***** T.MURAKAMI***** * |
Study on tensile shear strength of laminated dismilar welding joint using 1.5GPA class ultra high strength steel |
The Japan Welding Society National Meeting 2021(autumn) 172-173 |
*OSAKA UNIVERSITY **IHI Corporation ***Kawasaki Heavy Industries, Ltd. ****HIROSHIMA UNIVERSITY *****UACJ Corporation ******Kobe Steel, Ltd. |
2021/9/21 〜9/28 |
| OKADA Tohru YASUYAMA Masanori UCHIHARA Masato HUJII Hidetoshi* |
Effect of paint backing thermal cycle on joint strength of spot welds |
Quarterly Journal of JAPAN WELDING SOCIETY Vol39, No 3, 209-217 |
Nippon Steel Corporation *Joining and Welding Research Institute, Osaka University |
2021/9/28 |
| Xiaopei Wang, Yoshiaki Morisada, Hidetoshi Fujii |
Interface strengthening in dissimilar double-sided friction stir spot welding of AZ31/ZK60 magnesium alloys by adjustable probes |
Journal of Materials Science & Technology, 85,(2021),158-168 |
Joining and Welding Research Institute, Osaka University |
2021/9/20 |
| H.SERIZAWA* K.INOSE** R.OHASHI*** Y.SUGIMOTO**** T.MINODA***** T.MURAKAMI***** * |
Study on tensile shear strength of advanced multi- material laminated dismilar welding joint |
The Japan Institute of Metals and Materials 169 autumn Meeting 2021 |
*OSAKA UNIVERSITY **IHI Corporation ***Kawasaki Heavy Industries, Ltd. ****HIROSHIMA UNIVERSITY *****UACJ Corporation ******Kobe Steel, Ltd. |
2021/9/16 |
| Xiaopei Wang, Yoshiaki Morisada, Hidetoshi Fujii |
Interface development and microstructure evolution during double-sided friction stir spot welding of magnesium alloy by adjustable probes and their effects on mechanical properties of the joint |
Journal of Materials Processing Technology, 294,117104(2021), |
Joining and Welding Research Institute, Osaka University |
2021/8/1 |
| Tomoki Matsuda*, Seigo Yamada*, Tomokazu Sano*, Mitsuru Ohata*, Akio Hirose*, Akihisa Takeuchi* *, Kentaro Uesugi** , Masahiro Yasutake* * |
Fracture behavior of thermally aged Ag-Cu composite sinter joint through microscale tensile test coupled with nano X-ray computed tomography |
Materials & Design, Vol. 206, 109818 (2021) |
*Osaka University, **Japan Synchrotron Radiation Research Institute (JASRI)/SPring-8 |
2021/8 |
| Abhishek Sharma Yoshiaki Morisada Hidetoshi Fujii |
Influence of aluminium-rich intermetallics on microstructure evolution and mechanical properties of friction stir alloyed Al single bond Fe alloy system |
Journal of Manufacturing Processes Volume 68, Part A, Pages 668-682 |
Joining and Welding Research Institute, Osaka University |
2021/8 |
| Tomoya Nagira*,**, Xiaochao Liu***, Kohasaku Ushioda*, Hidetoshi Fujii* |
Microstructural Evolutions of 2N Grade Pure Al and 4N Grade High-Purity Al during Friction Stir Welding |
Materials (Basel) 2021 Jun 28;14(13):3606 |
*Joining and Welding Research Institute, Osaka University, **National Institute for Materials Science ***Southeast University |
2021/6 |
| Buchibabu Vicharapu *,**, Huihong Liu*, Yoshiaki Morisada*, Hidetoshi Fujii* & Amitava De*** |
Degradation of nickel-bonded tungsten carbide tools in friction stir welding of high carbon steel |
The International Journal of Advanced Manufacturing Technology, 115, (2021), 1049-1061 |
*Joining and Welding Research Institute, Osaka University **Indian Institute of Technology Palakkad, ***Indian Institute of Technology Bombay |
2021/5/19 |
| Ninshu Ma, Peihao Geng, Yunwu Ma, KatsushiShimakawa, Jeong-Won Choi, Yasuhiro Aoki, Hidetoshi Fujii |
Thermo-mechanical modeling and analysis of friction spot joining of Al alloy and carbon fiber-reinforced polymer |
Journal of Materials Research and Technology, 12, (2021), 1777-1793 |
Joining and Welding Research Institute, Osaka University |
2021/5/1 |
| Kazuki Ikushima, Zhihao Li, Yuji Kitani*, Shintaro Maeda*, Fumikazu Miyasaka*, Masakazu Shibahara |
Study on Mechanical Behavior during Friction Stir Welding Using Numerical Simulation |
Journal of light metal welding Vol59,No5,(2021) 170-176 |
Osaka Prefecture University *Osaka University |
2021/5 |
| Akio HIROSE | Dissimilar joining for muti- materials structures |
The Japan Institute of Light Metals Vol.71(2021), No.4, p.188-196 |
Osaka University | 2021/4 |
| Xiaopei Wang, Yoshiaki Morisada, Hidetoshi Fujii |
High-strength Fe/Al dissimilar joint with uniform nanometer- sized intermetallic compound layer and mechanical interlock formed by adjustable probes during double-sided friction stir spot welding |
MaterialsScience and Engineering: A, 809, (2021), 141005 |
Joining and Welding Research Institute, Osaka University |
2021/3/30 |
| Xiaopei Wang, Yoshiaki Morisada, Hidetoshi Fujii |
Flat friction stir spot welding of low carbonsteel by double side adjustable tools |
Journal of Materials Science & Technology, 66,(2021), 1-9 |
Joining and Welding Research Institute, Osaka University |
2021/3/10 |
| Ramy Gadallah, Seiichiro Tsutsumi, Yasuhiro Aoki, Hidetoshi Fujii |
Investigation of residual stress within linearfriction welded steel sheets by alternating pressure via X-ray diffraction and contour method approaches |
Journal of Manufacturing Processes(online)64, (2021) 1223-1234 |
Joining and Welding Research Institute, Osaka University |
2021/3/6 |
| M.Gan、 N.Ma、 K.Narasaki、 S.Tsutsumi、H.Fujii |
Modelling and Measurement of Thick Aluminum FSW Induced Thermal Strain and Residual Stress |
Journal of light metal welding, 59, 2(2021) 59-68 |
Osaka University | 2021/2/16 |
| C. Cheng, K.Kadoi, H.Fujii, K. Ushioda, H. Inoue |
Improved strength and ductility balance of medium-carbon steel with chromium and titaniumfabricatedby friction stir welding process |
MaterialsScience EngineeringA, 803, (2021),140689 |
Joining and Welding Research Institute, Osaka University |
2021/1/28 |
| Koki Kumamoto*, Ikuo Shohji*, Tatsuya Kobayashi*, Muneyoshi Iyota** |
Effect of Microstructure on Joint Strength of Fe/Al Resistance Spot Welding for Multi-Material Components |
Materials Science Forum, Vol. 1016, (2021)pp.774-779 |
*Gumma University **Osaka Institute of Technology |
2021/1/5 |
| G.Ozeki* T.Yokobori* T.Ohmi** T.Matsubara+ T.Katsumata+ |
Occurrence of Cyclic Strain Hardening and Non-destructive Prediction of Remnant Fatigue Life Based on MSE Method for SPFC780Y Steel Weld Joint |
Journal of the Japanese Society for Strength and Fracture of Materials), 54,3,(2020),58-64 |
*Teikyo University **Shonan Institute of Technology +Palmeso Co.,Ltd. |
2021/1/1 |
| Zhou Mengran, Sun Yufeng, Morisada Yoshiaki, Ushioda Kohsaku, Fujii Hidetoshi |
Quasi-in-situ investigation into the microstructure andtexture evolution of pure magnesium during friction stirwelding |
Journal of Magnesium and Alloys, 8, 4(2020), 1071-1083 |
Joining and Welding Research Institute, Osaka University |
2020/12/10 |
| Xiaopei Wang, Yoshiaki Morisada and Hidetoshi Fujii |
Flat friction stir spot welding of AZ31B magnesium alloy using double side adjustable tools: microstructure and mechanical properties |
Science and technology of welding and joining, 25, 8, (2020),644-652 |
Joining and Welding Research Institute, Osaka University |
2020/10/15 |
| T.Nagira, X.C.Liu, K.Ushioda and H.Fujii |
Mechanism of Grain Structure Development of Pure Cuand Cu-30Zn with Low Stacking Fault Energy during FSW |
Science and technology of welding and joining, 25, 8,(2020), 669-678 |
Joining and WeldingResearch Institute, Osaka University |
2020/10/15 |
| H.SERIZAWA | Database of joint performance for optimization of welding technology |
SAMPE Japan 2020 ONLINE − NEDO ISMA Project Symposium-Multi-material dissimilar material joint |
Osaka University | 2020/10/14 |
| A.Ikuta | Research Trend on Friction Stir Welding |
Bulletin of the JSTP | Kinki University | 2020/10/1 |
| H．Fujii | New Joining Methods for(Iron- Based)Automotive Materials: ISMA-Results |
Journal of the JWS, 89, 6,(2020),25-29 |
Osaka University | 2020/9/5 |
| Tomoki Matsuda, Tomokazu Sano, Masanao Munekane, Mitsuru Ohata, Akio Hirose |
Microscale tensile test of galvannealed steel/aluminum dissimilar joint for estimation of intrinsic interfacial strength |
Scripta Materialia,186, (2020), 196-201 |
Osaka University | 2020/9/1 |
| A.Hirose | Current status of dissimilar material joining technology |
The Iron and Steel Institute of Japan 「Ferrum」Vol.25 No.9, 2020, p.554-562 |
Osaka University | 2020/9/1 |
| I．Shohji*, K.Kumamoto*, M.Iyota** |
Microstructure and mechanical characteristic evaluation of resistance joint of in-vehicle use multi-material |
Automotive technology 7,11,54,50-54 |
*Gumma University **Osaka Institute of Technology |
2020/8/30 |
| Thomasprabhu Selvaraj* Shogo Ishida* Jinta Arakawa* Hiroyuki Akebono* Atsushi Sugeta* Yasuhiro Aoki** Hidetoshi Fujii** |
Elucidation of fatigue characteristics and fracture mechanism of friction stir spot‐ welded tension-shear joint steels |
Fatigue Fract Eng Mater Struct., 44 (2021), 74-84 |
*Hiroshima University, **Joining and Welding Research Institute, Osaka University |
2020/8/19 |
| Tomoki Matsuda, Ryoichi Hatano, Tomo Ogura, Reo Suzuki, Hiroto Shoji, Tomokazu Sano, Mitsuru Ohata, Akio Hirose |
Effect of mismatch in mechanical properties on interfacial strength of aluminum alloy/steel dissimilar joints |
Materials Science and Engineering A, 786,(2020), 139437 |
Osaka University | 2020/6/1 |
| Y. Morisada, T. Shirasawa, H. Fujii |
Medium and high carbon steel joints formed by friction welding below A1 temperature |
Science and technology of welding and joining,25, 5, (2020), 438-445 |
Joining and Welding Research Institute, Osaka University |
2020/6/1 |
| Xiaochao Liu, Yufeng Sun, Tomoya Nagira, Kohsaku Ushioda, Hidetoshi Fujii |
Effect of Stacking Fault Energy on the Grain Structure Evolution of FCC Metals During Friction Stir Welding |
Acta Metallurgica Sinica (EnglishLetters), 33, (2020), 1001-1012 |
Joining and Welding Research Institute, Osaka University |
2020/5/13 |
| Mengran Zhou*, Yoshiaki Morisada*, Hidetoshi Fujii*, Jian-Yih Wang** |
Pronounced low-temperature superplasticity of friction stir processed Mg-9Li-1Zn alloy |
Materials Science and Engineering: A, 780, (2020), 139071 |
*Joining and Welding Research Institute, Osaka University **National Dong- Hwa University |
2020/4/7 |
| H.Fujii | Basics of FSW and innovation of joining |
WE-COM Magazine ，WE-COM Exchange meeting of welding technician、 36 (2020) |
Osaka University | 2020/4/1 |
| H. Liu, Y. Aoki, Y. Aoki, K.Ushioda, H. Fujii |
Principle for obtaining high joint quality in dissimilar friction welding of Ti-6Al-4V alloy and SUS316L stainless steel |
Journal of Materials Science & Technology，(2020) Online 46,(2020),211-214 |
Joining and Welding Research Institute, Osaka University |
2020/2/19 |
| Y. F. Sun, H. Fujii, Y.Morisada |
Double-Sided Friction Stir Welding of 40mm Thick Low Carbon Steel Plates Using a PCBN Rotating Tool |
Journal of Materials Processing Technology,50, (2020), 319-328 |
Joining and Welding Research Institute, Osaka University |
2020/2/1 |
| Tomoki Matsuda, Kiriko Owada, Asahi Numata, Hiroto Shoji, Tomokazu Sano, Mitsuru Ohata, Akio Hirose |
Influence of interfacial structure on the fracture behavior of friction stir spot welded dissimilar joints |
Materials Science and Engineering ,A 772,(2020), 138743 |
Osaka University | 2020/1/20 |
| Takuya Wada*, Yoshiaki Morisada*, Yufeng Sun*, Hidetoshi Fujii*, Yousuke Awahito*, Muneo Matsushita* *, Rinsei Ikeda** |
Friction Stir Welding of Medium Carbon Steel with Laser- Preheating |
ISIJ International， 60, 1 (2020) 153-159 |
*Joining and Welding Research Institute, Osaka University **JFE Steel Corporation |
2020/1/1 |
| Tomo Ogura, Reiko Wakazono, Shotaro Yamashita Kazuyoshi Saida |
Dissimilar laser brazing of aluminum alloy and galvannealed steel and defect control using interlayer |
Welding in the World 64,(2020), 697-706 |
Osaka University | 2020/1/1 |
| B. Vicharapu*, H. Liu*, H.Fujii*, K. Narasaki*, N. Ma*, A. De** |
Probing residual stresses in stationary shoulder friction stir welding process |
International Journal of Advanced Manufacturing Technology，(2019)Online 106, (2020),1573-1586 |
*Joining and Welding Research Institute, Osaka University **Indian Institute of Technology Bombay |
2019/11/1 |
| H.Fujii, Y.Aoki |
Visualization of friction joining technology and achievement of 100% joint efficiency by low- temperature linear joining |
Journal of Japan Friction Joining Association 18, 2(2019), 3-23 |
Osaka University | 2019/10/1 |
| Yasuhiro Aoki*, Ryosuke Kuroiwa*, Hidetoshi Fujii*, Gen Murayama**, Masanori Yasuyama ** |
Linear Friction Stir Welding of Medium Carbon Steel at Low Temperature |
ISIJ International， 59, 10 (2019) 1853-1859 |
*Joining and Welding Research Institute, Osaka University **Nippon Steel & Sumitomo Metal Corporation |
2019/10/1 |
| Seung-Joon Lee*, Se Eun Shin**, Kohsaku Ushioda*, Hidetoshi Fujii* |
Microstructure, mechanical properties, and damping capacity in stir zone after friction stir welding of Fe- 17Mn damping alloy |
Journal of Alloys and Compounds, 803, (2019), 1155-1167 |
*Joining and Welding Research Institute, Osaka University **Sunchon National lUniversity |
2019/9/30 |
| T. Nagira, X.C. Liu, K.Ushioda, H. Fujii |
Influences of temperature and Sn-addition on microstructural evolution of Ag during FSW |
Science and technology of welding and joining,(2019), online 25,3,(2020),198-207 |
Joining and Welding Research Institute, Osaka University |
2019/9/4 |
| Kota Kadoi, Chun Cheng, Shun Tokita, Kohsaku Ushioda, Hidetoshi Fujii, Hiroshige Inoue |
Effect of Cr and C on Microstructure Evolution of Medium Carbon Steels during Friction Stir Welding Process and their Mechanical Property |
7th International Conference on Recrystallization and Grain Growth,(2019) |
Joining and Welding Research Institute, Osaka University |
2019/8/8 |
| H.Fujii | Friction joining technology- Friction stir welding,Linear friction welding |
Bridge and foundation engineering, 53, 8(2019), 105-108 |
Osaka University | 2019/8/5 |
| Chun Cheng, Kota Kadoi, Shun Tokita, Hidetoshi Fujii, Kohsaku Ushioda, Hiroshige Inoue |
Effects of Carbon and Chromium on Microstructure evolution and Mechanical Properties of Friction Stir Weldment in Medium-carbon Steel |
Materials Science and Engineering: A，762, (2019) 138060 |
Joining and Welding Research Institute, Osaka University |
2019/8/5 |
| Jeong-Won Choi、 Huihong Liu、 Kohsaku Ushioda、 Hidetoshi Fujii |
Dissimilar friction stir welding of immiscible titanium and magnesium |
Materialia， 7, (2019) 100389 |
Osaka University | 2019/7/15 |
| Jeong-Won Choi、 Huihong Liu、 Kohsaku Ushioda、 Hidetoshi Fujii |
Effect of an Al filler material on interfacial microstructure and mechanical properties of dissimilar friction stir welded Ti/ Mg joint |
Materials Characterization, 155, (2019) 109801 |
Osaka University | 2019/7/12 |
| Y.Morisada、H.Fujii | Development of flat joining technology for practical use of friction stir spot welding |
Welding technology, 67, 7(2019), 68-71 |
Osaka University | 2019/7/1 |
| T. Nagira*, X. C. Liu*, K.Ushioda*, Y. Iwamoto**, G. Ano** and H. Fujii* |
Role of annealing twinning in microstructural evolution of high purity silver during friction stir welding |
Science and technology of welding and joining,24, (2019), 644-651 |
*Joining and Welding Research Institute, Osaka University **Furuya Metal |
2019/7/1 |
| X.C. Liu, Y.F. Sun, T.Nagira, K. Ushioda, H. Fujii |
Evaluation of dynamic development of grain structure during friction stir welding of pure copper using a quasi in situ method |
Journal of Materials Science & Technology， 35,(2019) 1412-1421 |
Joining and Welding Research Institute, Osaka University |
2019/6/1 |
| X.C. Liu, Y.F. Sun, T.Nagira, K. Ushioda, H. Fujii |
Strain rate dependent micro- texture evolution in friction stir welding of copper |
Materialia 6 (2019)100302 |
Joining and Welding Research Institute, Osaka University |
2019/6/1 |
| H.Fujii,Y.Aoki | Friction joining technology for dissimilar material |
The Japan Society of Mecｈ anical Engineers ,, 122, 1206 (2019), 8-11 |
Osaka University | 2019/5/5 |
| Y. F. Sun, H. Fujii, Y.Sato, Y. Morisada |
Friction Stir Spot Welding of SPCC Low Carbon Steel Plates at Extremely Low Welding Temperature |
Journal of Manufacturing Processes, 35,(2019), 733-741 |
Joining and Welding Research Institute, Osaka University |
2019/5/1 |
| X. C. Liu, Y. F. Sun, T.Nagira, K. Ushioda and H.Fujii |
Experimental evaluation of strain and strain rate during rapid cooling friction stir welding of pure copper |
Science and technology of welding and joining,24, (2019), 352-359 |
Joining and Welding Research Institute, Osaka University |
2019/4/15 |
| H.Fujii | Overview of research and development pf ISMA project theme46 |
JAPAN WELDING SOCIETY, 88, 3,(2019), 166-169 |
Osaka University | 2019/4/5 |
| Y.Morisada、H.Fujii | Visualization of plastic flow phenomenon at friction stir welding by X-ray transmission device |
JAPAN WELDING SOCIETY 88, 3,(2019), 170-173 |
Osaka University | 2019/4/5 |
| A.Ikuta | Basic study of tool lifespan improvement by tool design |
JAPAN WELDING SOCIETY, 88, 3,(2019), 174-179 |
kinki University | 2019/4/5 |
| F.Miyasaka | Development of numerical analysis technology of friction stir welding by particle method |
JAPAN WELDING SOCIETY, 88, 3,(2019), 180-182 |
Osaka University | 2019/4/5 |
| M.Shibahara, K.Ikushima |
Mechanical analysis method of FSW by particle method and finite element method |
JAPAN WELDING SOCIETY, 88, 3,(2019), 183-187 |
Osaka Prefectual University |
2019/4/5 |
| Y.Aoki, H.Fujii | Linear friction stir welding of medium carbon steel |
JAPAN WELDING SOCIETY, 88, 3,(2019), 188-192 |
Osaka University | 2019/4/5 |
| R. Kuroiwa*, H. Liu*, Y.Aoki*, S. Yoon*, H. Fujii*, G. Murayama**, M.Yasuyama** |
Microstructure control of medium carbon steel joints by low-temperature linear friction welding |
Science and Technology of Welding and Joining(online) , 25,1,(2020) |
*Joining and Welding Research Institute, Osaka University **Nippon Steel & Sumitomo Metal Corporation |
2019/4/4 |
| T. Nagira, X.C. Liu, K.Ushioda, H. Fujii |
Influences of temperature and Sn-addition on microstructural evolution of Ag during FSW |
Science and technology of welding and joining,25, 3, (2020), 198-207 |
Joining and Welding Research Institute, Osaka University |
2019/4/1 |